Jump to content
SAU Community

The Law For Modification


viet_boi
 Share

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

with neons, they have to be hidden from view, and not able to reflect off any chromed surfaces, they are also to be all of one colour, and not to flash. and linking it with the car lighting, your not allowed to have red lights displayed at the front of your car, so technically that rules out red neons. now to link it with emergancy vehicles, red/blue lights fall under police/ambulance lights, and now western power vehicles with orange lights are emergancy vehinces too(99% sure) so technically that rules out red/blue/orange, and then you are not allowed to display white light at the rear other than the reverse lights, so techincally again white, red, blue and orange are ruled out as colours for neons.

Has this changed recently?

I had red neons under mine (until the rear stopped working), and I have been pulled over a couple of times and thats what they said...that red and blue lights are reserved for emergency vehicles, although I am not sure how they could mix up undercar neons for flashing lights on a roof. Anyway, both times they took my phone number to find out for sure and let me know and I never heard from them both times. So I assumed that they were mistaken if they did bother to call the technical department.

I do know that to be legal the tubes cannot be visible to other drivers, and they cannot pulse etc as Mitchy says, but mine was connected to my light switch with an override and there wasn't any problem with that.

Link to comment
Share on other sites

I am pretty sure that for WA rims are not supposed to larger/wider than 2 inches from that stamped on the tyre plackard. So if it was stamped with 16 x 7, then you could go up to 18 x 9, but not sure really how strict they apply those rules.

...I think the standard noise level limit for exhaust is something like 92db or 98db...but there are guys out there with a lot louder, like mine is 102db and I got a mod permit for it, and there are others louder so dont know how strick they are on this.

They are however very strict on ride height. Lowest part of the body must be at least 100mm off the deck, and/or headlights minimum 500mm off the deck, whichever comes first.

In terms of other mods there seems to be big grey areas too. I have a atmo BOV that passed, the inspector just said I need a permit for it, so I got it added to the list...easy as that, where as others have said that they are illegal.  :D

rim DIAMETER can go up 2" from the largest factory option, but width follows my previous post, ie 7" max unless wider was a factory option.

Link to comment
Share on other sites

im pretty sure the rear seat windows can be as dark as u want, and only the front 2 windows and back screen need to be the 35% limit.

like a panel van or wagon can paint there rear windows (except rear glass) black if they want.

I had a (R31) wagon with 20% tint all round, when I got a sticker Warwick pits said I had to take ALL the tint off.

I had bought an R31 sedan the same day that I got the sticker (got the sticker later that night) swapped the font and rear door windows, left the rest of the tint on and went to Midland pits. The guy said it was meant to be 35% all round, and couldn't be darker, even if it was a wagon, I asked what about vans and Pano's and he said they could do it because they where classed as commercial vehicles. He still passed me though :D

The same probably goes with bikes, different rules

I would take some of the claims in the first post with come caution, seeig as they think a n external gate is a BOV... I would rather hear something from the DPI, in plain english

Link to comment
Share on other sites

the CF ...cars have to be older than 1993..that's when they change the law making Cf illegal....

pod filters have to be secured...

BOV cannot be atmospheric has to plumb back...

also FMIC cannot be water cooled...

Link to comment
Share on other sites

Atmo BOV will get passed at the pits, as long as they do not produce to much "noise"

which is totally up to the discretion of the inspector

just disengage the BOV when you go over the pits resulting it the noise coming out through the air filter all muffled

just make sure you get a permit for it

and on that note, if you have a permit mod, dont keep the original in your car as the cops have a tendancy to rip them up

Link to comment
Share on other sites

Does anyone know why you aren't allowed to have tyres wider than 9", and also why the front tyres and the rear tyres have to be the same width? As long as nothing is brushing or touching anything I can't see any reason why they are illegal, like from a safety perspective or something.

"I eated the purple berries... they taste like burning!"

Link to comment
Share on other sites

Because they said so...

yeah pretty much hey

my rims are 7 1/2 inches

is f**ken annoying

keep having to borrow stockies when i get a yellow

dont think the offset really helps me any either

apparently you are only allowed to increase the Track of your car by 25mm which is stuff all

my rims increase my track by like 2 inches if not more

Link to comment
Share on other sites

Ok, so some of you may think I am speaking shit, cos what I am about to say will fly in the face of what some people have posted here, meh.

I just had my rego transferred from SA to WA, the following were found to be legal

17.10 inch rims rear, 17x9 front, both were measured - the only thing the inspector commented on was the width of the tyre - had to be correct for the rim (they are slightly stretched, so he checked), he also checked the track, as I have widebody rear and pumped front guards. He also pointed out I had some rubbing under the rear, I told him that is why I got the adjustable rear camber arms and he was happy.

They will not give a permit for exhausts or suspension. I had coilovers and adjustable arms fitted, no problems, but he also wouldnt give me permits for them - he said 'they are either legal or not' Same for my wheels.

Car legal exhaust is 90db, MC its like 98 or 100 or something, but louder than car, truck is also louder than car.

Guages can be fitted to the A pillar, but must be fitted in a manner that they will come off if you hit your head on them, or out of head impact range.

I also got permits for Bride seats, centre gauges, steering wheel and handbrake cover. He didnt bother giving me one for the shift knob. I also got permits for intercooler and piping, manifold, catch can, front and rear strut braces and pod - basically all the aftermarket looking bits.

Hope that helps

He (the inspector) said he doesnt normally give permits for pods (or exhausts :) ) anymore, but as a couple of guys had been through recently with defects for pods, so I got one off him for it (he was also bitching about cops defecting cars who didnt know what they were doing.

I was also told pre 1996 cars can have c/f or fibre glass bonnets, as they predate ADR front end crash test requirements. vents are ok, as long as they have mesh (to stop fingers). The bonnet must also have a double latching system (as the factory one does).

Do yourselves a favour, if you have mods, get permits, its pretty easy, and I found the guys very reasonable. Its cheaper to spend $30 for a mod permit, than it is for a full inspection. (can save heaps of dramas too)

Oh, and I laminated my permits too :P

I love it over here, in SA, a car has to be practically completely factory to pass, including ride height.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Cheers Lads Looking at changing up a few things maybe go 2.8lt, bigger injectors with more a modern Turbo. Possibly transbrake and convert to E85 with Haltech ECU. Any thoughts on those Mods changes or better ideas? Want to try keep the car Street/Strip While also being weekend drivable still.  
    • The time has come, once again, for us to celebrate all things GTR! Motive DVD's GT-R FESTIVAL for 2024 is fast approaching, and we couldn't be more excited to be part of this awesome event once again! As usual, SAU NSW will be be part of the event, with our traditional club display on the day! If you would like to be part of it, firstly, you'll need to make sure you secure your Display Entry into the show via the below link by Motive Video: https://gtrfestival.com.au/ Other tickets are also available, ie. VIP Entry or Drag Entry, for you to also choose from. Once you have your ticket locked in, make sure to send us a PM via Facebook so we can add you to our list of display cars! When you message us, we will gather some more details from you to make sure we can spot you on the day, and guide you to the right place! If you'd like more information regarding the day, please refer to Motive Video's event page, or, you can get in touch with us and we will help you as best as we can. As always, general details are below: Date: Friday 24th May / Saturday 25th May Location: Sydney Dragway Time: 6.00pm Friday / 9.00am Saturday We look forward to seeing you all on the day! One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAUNSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • We're a bunch of suspicious skeptics here. So when we see a new user describing themselves as a "guy" but showing "Female" in the bio, we immediately suspect "bot" and "spam". If you are legit, then welcome. If you are a spambot, then die in an AI fire. No offence (unless you're a bot). What car did your dad drive when he met your mum? (Call this a car forum Turing test, if you like). What car did your mum drive when you started school? What car did your date drive to your first formal/prom/whatever. What do the majority of the license plates in your local area have on them (the state motto, the county motto, whatever)?
    • Howdy All! Minutes from this year's AGM attached! Thank you to the old committee for a great year & good luck to the new (*cough* same) team for the year ahead! See you all soon!   SAUNSW_2024 AGM Minutes_04052024.pdf
    • Hey guys! Just rolled into this awesome community and let me tell you, I'm stoked!  Cars have been my jam for as long as I can remember, and there's nothing I love more than talking about them. It doesn't matter if it's the latest performance mods, DIY hacks that'll blow your mind, or just nerding out over engine specs –  I'm all in. I know I'm the new guy here, but I promise I'm not all talk. I want to be a part of this community, learn from the veterans, and maybe even make some friends along the way. So, whether you've been wrenching on rides for decades or just getting started like me, feel free to say hi, share some advice for a newbie, or just throw out a random car fact (because, let's face it, those are always fun!). Looking forward to getting to know you all and becoming part of this gearhead family! Thanks Pihu
×
×
  • Create New...