Jump to content
SAU Community

Recommended Posts

heres a dyno graph all readings are on the same dyno (different days though) and they are on the same graph to read easier.

they are all rb26 engines with rebuild bottom ends (except the highflowed turbos engine which is dead stock). they are all stock capacity and the t04z engine and gt42 engine have different cams to stock.

there is a...

GT42 with 1.0 housing

garret T04Z 0.84 housing

r34 ball bearing low mounts

r32 highflowed stock turbos

here ya go...

108_0841.jpg

cheers

Brad

Link to comment
https://www.sau.com.au/forums/topic/99705-turbo-comparisions-on-rb26s/
Share on other sites

If all of the turbo's were tuned to max power then psi is irrelevant, one may make less power with more boost.

Diff ratio's here are irrelevant as its all done to RPM..

The poor bloke with the GT42.. Much too big for the 2.6ltr.

Excellent comparision.

Edited by Cubes

Fair enough, I missed the point that they were all rebuilt and tuned to max power.

Only saying that - some engines/boost may not be tuned as high due to different compression ratios, based on HG thickness or engine comp ...

But this is probably the best comparo possible. But i would still like to know boost pressures run across the board, if at all possible

the gt42 was lowish boost, i think around 20psi from memory, the t04z is on 18psi, and the r34 bb turbos i dont know, and the highflows are 18psi.

the t04z graph is simon (r32 GTS) on this forum on low boost (made 620hp i think recently on 23psi)

or by this you can see that twin hks t04z with 0.63 a/r rear housings are almost as responsive as a gt42 with 1.06 a/r.

added a garret t04z with.8 a/r as well for comparison

32gtr_581.jpg

IMG_9652_edited.jpg

32gtr_627.jpg

gt42 is running only 20psi

t04z are about 24psi

twin t04z's are about 28psi

Edited by Cerbera

Funny how some shops will claim more power from one ECU to another.

All ECUs will make the same power if the timing,fuel,turbos,intake etc are the same.

Note that its also the only graph not in full shootout mode.

The history of the 581hp car makes it a poor example as its had a few GCG turbos and GT42 cartrage in GCG housings and many engine builds plus 3 different ECUs and a best of low 12s at the drags, tho the Wolf that it was lending has done the fastest GTR pass in WA to date at 10.7.

Still looks like the TO4Z is the best street strip turbo at the moment.

LOL fastest GTR pass in WA @ 11.7

are you on crack

ND4SPD 10.7

Simons GTR 10.8

Got Boost (gts4 with rb26) 10.9

not even close to the lofty 11.7 you speak of

f**k even bobbos dead stock GTR did 11.8 .. stock turbos internals cams, mines rom, boost zorst and it hoses many a aftermarket ecu equipped GTR time..

Yeah the 581 rwhp is such a crap example.. had massive money thrown at it, blown up on a dyno (oh the memories) , its not like the dog box, autronics etc etc meant that the owner built the car to the best of standards...

/rant over

Brad well done for the post

Edited by [teejay]
Funny how some shops will claim more power from one ECU to another.

All ECUs will make the same power if the timing,fuel,turbos,intake etc are the same.

Note that its also the only graph not in full shootout mode.

The history of the 581hp car makes it a poor example as its had a few GCG turbos and GT42 cartrage in GCG housings and many engine builds plus 3 different ECUs and a best of low 12s at the drags, tho the Wolf that it was lending has done the fastest GTR pass in WA to date at 11.7.

Still looks like the TO4Z is the best street strip turbo at the moment.

also i do believe 2 GTR's and one GTS-4 have done 10's in WA

Edited by Cerbera
tho the Wolf that it was lending has done the fastest GTR pass in WA to date at 10.7.

Actually, the fastest pass by a gt-r in wa is Kier wilson, 9.something in his drag gt-r, and his street car backed it up with a low 10, and they both run motec..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...