Jump to content
SAU Community

boostn0199

Members
  • Posts

    2,536
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by boostn0199

  1. Its illegal in aus isnt it ? So cant get it.
  2. Ye thats just keep dirt and stuff out. The only gasket there is he could be talking about is the one under the input shaft but yeah thats not a bellhousing engine one.
  3. How much wuld i need to grind off 6mm the thickness of the spacer?
  4. Ohh so it does require the stops to be grinded down. Can it be done while on the car or do you have to take the knuckle off.
  5. No problem , as lOng as the rod fits onto the flap and opens and shuts without any trouble it will work.
  6. Yeah nissan are f**ked you can buy a good second hand motor for that much.
  7. Just clean them its not that hard once you get the hang of taking one apart it easy. Or you can slways buy 21 and clean 3.
  8. So what ie it that you think you mixed up didnt quite get it reading your post?
  9. The apexi power intakes would be my pick very small and one of the best flowing pods.
  10. I had the same probelm like you describe bottom hose wasnt hot and it would get to about 90 and slowly climb up. Was the thermostat and air in my case but yeah see how you go without it just make sure you bleed it! Wait until coolant is pissing out of that bleeding screw with no bubbles.
  11. Welcome to the troubleshooting world of mOdifications lol. But yeah personally parts like afm coilpacks injectors fuel pumps i would never buy 2nd hand or cheap options there important parts so i believe get the best since alot of problems come back to parts like these.
  12. Ye its not opening if bottom one isnt warm. Common mistake is when you put too much off that gasket goo for the thermo you can jam the jiggle valve aswell which traps air.
  13. Should of just dissasembled them all and cleaned since they were out anyway. Yeah hydrulic lifters dont have adjustment.
  14. Could be some air still in it its suprising how much problems it can cause. Id give it a real good bleed first before going anywhere. Is your thermostat opening?
  15. Yeah that was in my head to that he mentioned unbolted from diff where he should unbolt from the centre after the bearing. Should post a pic to see whats the problem
  16. Im pretty sure my stock rb25 Ones did.
  17. Im pretty sure my stock rb25 Ones did.
  18. http://www.nissansilvia.com/forums/index.php?showtopic=230972 Go to the link they have before and after photos pretty good gains.
  19. Why would he have to unbolt the centre bearing he just needs to unbolt the tailshaft half way and pull it out there a 2 piece.
  20. I just got some gktech 6 mm rack spacers to go on my r33 and just wondering are they fine to work witjout any others mods like modifying the bump stops on the knuckles etc?
×
×
  • Create New...