GTSBoy

Oh, yeah, there's no reason to avoid using the existing plumbing. What is there can be used to make it work properly. You just have to plumb it up correctly. I re-iterate to the OP. If it is not working, it is NOT PLUMBED UP CORRECTLY. And, to follow on from Joshua's repeated suggestion that the MAC valve might have differently labelled/functioning ports compared to the usual MC valves, I posted extremely clear instructions on how to work out which port is which, earlier in this thread. So there should be no excuses there either.

This would require you to drill and tap into the alloy of the merge pipe, to put in a nipple, or weld a nipple onto the hot pipe after that point. The reason here is that the drawing you showed, with a line coming from each compressor housing, teed together to feed the solenoid valve, only works when you have tapping points on the compressor housing, which you won't have. I really struggle to understand what you mean by "only goes 1 way". What was it you're trying to do there?

Surely you just go buy from Nissan genuine parts?

Well, clearly the best Rb26 is an RB25Neo

Twin charged. Series of turbo compressor and a supercharger.

Then....it's still not plumbed up correctly.

Try shining other light sources on there. Red or orange filter on a normal light, UV LED torch, etc.

Well, you could run a new fat power wire over there if you wanna get closer.

Yup. Starting to work.

What is the voltage at your pin 45 and at your pins 48/49? Is the 0.7v difference there? If so.....the problem is in your ignition switch?

I'm not sure it's all working. This is a snip of my "Unread Content" page, admittedly after I had already opened new threads that I saw on my usual forum pages. There is nothing new there - the one from you on the top has been hanging around for ages now. I don't know for sure that there is no other activity elsewhere on the site that is missing from here, but I would presume that there should be something going on in the nether recesses (like the NA forum, the VQ engined forums, state forums, etc).

Pic in the first post is of a nasty, generic, sliding caliper as found on Corollas and other shitboxen, including NA Skylines (at the front). Pic in the 2nd post is the 2-pistone opposed caliper as found on the rear of turbo Skylines.

Because they are all in the bin.

Well, yeah. Like every car since the 1970s.

No. The 350/370 era stuff is likely to be different. Might be compatible, but I don't know, and Nissan was in a state of flux at the time. The Z32 would likely be same same, for an R200 (not the R230) as it was exact same period. Earlier 280ZX etc could well be different, as they were long nose diffs (I think).

It would be the turbo, and injectors & management required to fuel it. A fuel pump would be required, and a FMIC would be expected - you wouldn't get there on the stocker. Turbo back exhaust, ditto. No mods would be required to the engine.

Nah, you see, because people say "grub screwed the crank" I always just presumed that they were actually just using grub screws. I should just know better than to take people's wordbabble at face value.

Fair enough. Plugs, not grub screws, given that the two are quite different things, even if they're being used for the same thing. I guess it's reasonable to presume that "grub screwed" is the wrong term anyway, given the usage case here.

Cute.

Nah, it's borked. Depends on what you mean by "new posts don't show". I see new posts, but the latest posts page isn't working, and other issues. There's 2 reports of this in the feedback forum.

They make grub screws with pipe thread?

Hmm. This is making me want to unnecessarily rebuild my engine.

Yuh. As per the other thread. Borked.

I didn't respond immediately, in the hope that someone actually knew a god answer, but seeing as no-one has responded yet.... I wouldn't hold out too much hope of there being a "kit" to rebuild one of these. Whether you can even get everything you need to fully rebuild one might even be hard to answer. I'm sure that you can likely get calves and rods and pistons and rings and bearings and the like. But sneaky little minor parts might be harder to track down.

Yeah, I noticed the Unread Content page stopped updating a couple days ago. The Latest Posts section on the right still works, so it's not all broken.