Search the Community

good afternoon all, Im looking to buy a mint condition R32 GTR drivers seat (may consider a pair) must be good condition and happy to pay for top condition. i can arrange postage my end if interstate, im in Adelaide. money ready to go let me know what you have.

G'day guys and girls, I have recently began to throw together a few safety items for my 93 R33 Gts-s Coupe and have a few questions i couldn't quite get answers for. Firstly, Bolt in rollcages. I searched all through this forum and read what i could but the information i found was a bit old now, so recently i got into contact with a mob called AGI Precision about potentially getting either a half cage of a full cage both of which would be bolt in. The reason im going bolt in is because the chances of me wrecking my car on the track is sitting at about 53.4% and i would rather like to use it again rather then having another made for the next chassis. Anyway so i got a quote from them and the prices are fairly reasonable for both options, what im asking from you guru's is any word on this company. Has anyone delt with one of their cages before? Got a friend with one? Maybe own one? Or even scrutineer one? Im very interested in feedback on them before i proceed with purchasing. Secondly, Fixed Bucket Seat. As a 6'1 fella with 90kg's on him and a comfortably sized ass im trying to see what suggestions everyone might have, i have had my eyes set on a Velo GP90 for some time and i've read some good things but im open to suggestions and opinions. Also with that what rails should i be using? Do i want to keep the standard sliding setup or just go fixed mounting position? Do i need to be so low that im barely able to see over the dash? Lastly! Racing Harness. Again im open to suggestions on this one, im not after some wank factor set i just comfortable ones that have a good release mech and will keep me safe if all goes to hell. As a R33 owner i am a tight-ass but when it comes to this stuff im willing to put down the extra cash to keep me safe, oh and i live in the middle of bloody no-where so trying out seats and harnesses for myself quickly becomes a very costly exercise so im putting my trust into your feedback. Thank you for your time.

(Continuing from this thread http://www.sau.com.au/forums/topic/326464-best-place-to-try-racing-seats-in-melbourne/ ) Ok so I went and got a new seat for the R34 today, a Sparco Sprint V fixed back. Now I just have to get it mounted it in my R34 GTT Sedan Here's what I've learned so far by having a look around (see pics below too): The Sparco is both FIA and ADR approved The OEM seat is secured by bolts not rivets so theoretically it could be replaced with another The seat belt receptacle moves with the seat, which I'd love to retain with the new seat The OEM seat bolt pattern is 325mm wide, 350mm deep The Sparco bolt pattern is 345mm wide, 270mm deep, so it'll need offset plates at least The bottom of the OEM is curiously shaped – the front is higher than the rear to clear the height/tilt control mechanism. I'm not sure if you can just drop in a flat bottomed seat but perhaps worth a go. With the rear of the seat at its highest I think a flat seat would clear the cross bars (see pic). I didn't buy the Sparco slider yet as I'm keen to try mounting on OEM rails and slider if possible. Has anyone mounted the Sparco or a similar fixed back seat on the OEM rails in a 4door GTT? Is there any chance of retaining the OEM height/tilt controls without breaking the original seat? Would the new seat fit next to them? The controls go through the fabric but I'm sure the knobs come off somehow. If OEM rails are not possible what's the recommendation? I've read somewhere that Bride rails might work but I want to be 100% sure as this is a sedan and apparently the coupe floorpan is different. With the sedan the rear end of the LH rail bolts onto the transmission tunnel (side) whereas the front end and both ends of the RH rail bolt onto the floor. Also what do you do with the seat belt receptacle (which I must retain for the street) on an aftermarket rail...? Thanks heaps!! Sparco bolt pattern: OEM seat bolt pattern: Seat adjustment mechanism: Seat adjustment knobs: Sparco Sprint V: I'm planning on running normal 3-point belt on the street and a 4-point harness on the track, a bit like this (notice how the seatbelt receptacle is slotted through the side of the seat): On the track I'm planning on running the harness to the rear seat belt points as a harness bar is not an option in this car:

Hi all, Have a Bride Rail I bought for my GTR but decided to stick with the standard seats, Drivers side Model is BRIDE N047 Bottom mount 2 piece rails Condition is excellent Sliders are smooth Asking $125 Happy to deliver Australia Wide via AusPost

Up for grabs is my Genuine Bride Vios III fixed back, Bought over a year ago and only been used twice, Paid over $1,300 Need it gone $900neg No rails Located Bayswater Vic Any questions or pics (won't let me upload pics) plz msg or call me on 0412664221 Cheers!

Hey guys, Got a couple of R33 front end bits to get rid of: - R33 GTSt S2 Bumper - $100 Damaged, could be repaired by bumper re conditioners, or good for a drifter/track car. - R33 GTSt S2 Bonnet - $80 Some dents and scratches, good for a drifter/track car or get the dents filled. - R33 Bonnet Support Bracket - $25 Includes horn and catch. - R33 GTSt S2 Headlights - $200 / $100ea Some damage - broken mounts have been repaired. - R33 GTSt S2 Drivers seat - $50 Worn bolster. Slider needs greasing not very smooth. Pics available on request. Located Melbourne's East - will freight at buyers expense. Cheers, Mat. O4OO 558 O3O

Hi there, Up for sale is my genuine Bride Brix 1.5 with a genuine Bride S13/14 seat rail. Dark blue with black insert. No bolster wear No rips No tears No ciggie burns No stains Foam in good condition $650 ONO with S13/14 rail. Will fit R32 Gtr however only 3 of the 4 bolts will line up. Pics to come. Pm me or contact me 0404097043

Item 1. Genuine Rays Volk TE37 in White, 5 x 114.3 - 18 x 8,5 +30 - 19 x 9.5 +35 - Have just returned from slight gutter rash being removed, sand blasted and powder coated - Stickers available from eBay - $250ono Item 2. Genuine Exedy Clutch - Genuine Exedy OE Replacement (Full Faced Organic) Clutch / Drive Plate (NSD098U) -$100!!! This plate is found within the following Exedy clutch kits: Exedy NSK-6531 Exedy NSK-6531HD Exedy NSK-7056 Exedy NSK-7056HD Exedy NSK-7297 Exedy NSK-7297HD Exedy NSK-7377(SMF) This Listing Suits The Following Application(s): Nissan 180SX RPS13 (SR20DET, 01/1991 - 12/1998) Nissan 200SX S14 ADM (SR20DET, 10/1994 - 03/2000) Nissan 200SX S15 ADM (SR20DET, 01/2000 - 01/2002) Nissan 300ZX Z31 200ZR (RB20DET, 10/1985 - 06/1989) Nissan Cefiro LNA31 Attesa Cruising (4WD) (RB20DET, 08/1990 - 08/1994) Nissan Cefiro R©A31 (RB20DET, 09/1988 - 08/1994) Nissan Laurel R©C33 (RB20DET, 04/1989 - 01/1993) Nissan Pulsar RNN14 GTI-R (SR20DET, 08/1990 - 01/1995) Nissan Skyline HR31 JDM (RB20DET, 08/1985 - 05/1989) Nissan Skyline HNR32 GTS-4 (RB20DET, 08/1989 - 08/1993) Nissan Skyline H©R32 GTS-T (RB20DET, 05/1989 - 08/1993) Nissan Skyline E©R33 GTS25-T (Series 2) (RB25DET, 01/1995 - 05/1998) Nissan Skyline E©R33 GTS25-T (Series 1) (RB25DET, 08/1993 - 01/1995) Item 3. OMP Race Seat - FIA Stamped - Purchased from Revolution Racegear - Comes with Revolution Racegear side mount brackets - $400ono Item 4. Just Jap Seat and Passenger Rails - Made for comfort - Custom made passenger seat rails - $150ono Item 5. HKS EVC 3 Boost Controller - As Pictured - $200 - All items are in Clayton, Victoria 3168 - I am willing to post, please PM me - Discounts for buying multiple items - Make an offer - 0421 489 894

100% Genuine Bride Right Hand Side (Drivers) Seat Rail for Nissan R32,R33,R34,C33 & A31 (not R34GTT). The exact model number is N045MO New - never used. Comes with all fittings. Great for mounting Bride and Recaro SR seats into your Skyline. $220.00 plus shipping. Price is firm as this is a 'new' item. PM or text me on 0405 650 379. Cheers, Anthony