Jump to content
SAU Community

Recommended Posts

Hey guys iam close to buying a ECU for my R33 GTST and i was wondering what brand ECU is best and can you buy a plug in ECU for a auto skyline or do i have to get a wire in unit because i have asked heaps of people and like it normally is everyone's got a differant idea, If you can help me it would be much appreciated

cheers

Link to comment
https://www.sau.com.au/forums/topic/109061-what-ecu-is-best-for-r33-gtst/
Share on other sites

if you do a search you will find a shit load of threads all stating that :

no after market full replacement ecu works properly with the auto , although some claim they do , they dont

this limits you to interceptor type devices like the safc II or emanage

well an apexi isnt a wire in for a start

i think you should search

Hey man i was told that i couldn't buy an apexi plug in because my car was an auto so i naturaly thought it was a wire in unit sorry about that iam new to all this

with an auto You might have to run a Piggy back computer

or you can run a

Hydra EMS computer

which adaps the auto box funcitions into it

Wat is the damage and have you seen them work on an auto

james

  • 4 years later...

Lol dood i dont think people have had a good read at this topic. Mate unfortunatley you cannot use a apexi power FC because it doesnt support automatic gearbox intergration. You could try wolf3d im stuck in this situo as well. Too head you in the right track you will have to have a piggy back ecu or Use another ecu for Fuel and Ignition and use the standard ecu to run everything else. Also try a nistune supplier http://www.nistune.com/workshops.html

mythbusters ahoy

and blast from the past - beyond 2000

you cannot (well shouldn't) use most stand alone ECU's on ECR33 Auto

this is because the standard ECU has all the logic for gearchange control

if you replace this ECU with a standalone that is a MANUAL ECU (that is, does NOT support the ECR33 AUTO box) then it assumes manual

it wont back out timing on gear change, which results in harsh/jerky gearchanges and the changes put stress on the box

this "gotcha" applies to most stand alone ECU's, be it Apexi, HKS, Motec, Autronic, Wolf etc etc etc

your best option is nistune or emanage or remap or safc

all of these options keep the stock ecu, and retain the factory gearbox logic

users have insisted that powerfc (and other stand alone ecu's) etc work on AUTO

and the truth it, it does work, you can start the car

you can drive, you can boost it etc

but the changes will be harsh and youll risk the box

if you are OK with that, go for it, but you know the risks/results

this "gotcha" only applies to ECR33 auto where the gearbox is electronic control logic and needs the main ecu to do the logic change for it

cars such as vl turbo, toyota either have seperate ECU control for autobox or mechnical (vl turbo)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok guys thank you very much. GCG highflow it is then 🙂 
    • forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
×
×
  • Create New...