Jump to content
SAU Community

Recommended Posts

In Melbourne I do it, in Adelaide Martin Donnan, In Perth Speedworks with Badbiki. And there's the fact that Badbiki and PLMS both sell rom editing boards for DIY.

My contact is [email protected] 0425 818 755

More than happy to send any QLD enquiries your way, and perhaps you could return the favour....

Remapping is certainly a far better option than E-Manage.

Sam.

  • Replies 234
  • Created
  • Last Reply

Top Posters In This Topic

And Mark at Hills Motorsport in Sydney also remaps standard computers, and Powerplay also in Sydney sell remaps done in jp by a ex-nismo engineer.

Plenty of choices, and a remapped standard computer is a great thing. We run them in our race cars, we get to keep the knock sensor and consult ports among other things ;)

I work for chiptorque down at the coast.  I would suggest you bring it there as we are the only people in Aus that can reprogram the factory ECU as far as I am aware.  Tell me more about it so I can give you the approximate gains.

A few mods are in my spare room at the moment but they will be before I get it tuned.

Redtop sr20det 180sx auto,

GTi-R t28, full exhaust, pod, stainless exhaust manifold, FMIC, boost controller, walbro.

I have 550cc injectors (top mount + rail + FPR) to go in, and would get a bigger AFM if recomended.

I looked at chiptorque's pricing a while back, and it was significantlymore expensive than an e-Manage($400) + tune ($200), are the prices on the website are still current and un-flexible?

I'm a cheap bastard you see.

Would definately suggest bigger AFM (z32 are good) as the standard airflow meters usually restrict power to around 160 - 170rwkw somtimes you can get more. With those mods your probly looking at around 200rwkw. This is a rough estimate. Hmmm sard injectors not my favorite to tune but they are ok. I will find out a definate price for you. You might have some time to save as our booking period is about 3 weeks in advance at the moment but we'll see what happens. You cant really compare the E-manage to a re-mapped ECU, talk to any of the guys in the know.

Would definately suggest bigger AFM (z32 are good) as the standard airflow meters usually restrict power to around 160 - 170rwkw somtimes you can get more.  With those mods your probly looking at around 200rwkw.  This is a rough estimate.  Hmmm sard injectors not my favorite to tune but they are ok.  I will find out a definate price for you.  You might have some time to save as our booking period is about 3 weeks in advance at the moment but we'll see what happens.  You cant really compare the E-manage to a re-mapped ECU, talk to any of the guys in the know.

I am chasing around realistically 200rwkW (optimistically 210-220), so the AFM will be obtained for install at the same time.

The injectors are Denso (which I think are made by Sard anyway?), and I got the set of 4, top mount rail and malpassi adjustable FPR with guage for $350 the lot. :) Told you I was cheap.

I have a few questions (starting to get off topic, but I'll press on anyway): Are the maps preset One-size-fits-all, or is each car tuned on a dyno? Also I will be getting a high stall/transcooler/shift kit down the track, will the ECU need to be re-tuned to accommodate?

The price for the ca18det is a lot more appealing @ $600, comparable to the e-Manage + dyno time, why is the sr20det package one and a half times the price @ $900?

Also the chiptorque website is a bit thin on technical information, and what exactly is done to the ECU, whereas I know exactly what features the e-Manage will provide. Can you explain it in detail what functions of the ECU are adjusted?

Sam - Sounds like you've got much the same gear as us. Yeh we can do the r33 25 however we need to get the boards in from Japan. The focus of the company is more aimed at ford and holdens however we can tune anything really, we've recently had a couple of 360 Modena's in lately very nice. It just depends these days where you want to specialise I guess. The other thing is budget, if you could afford to R&D every car to the level that we wanted we would most definately be out of business. I'm sure you find yourself in the same predicament.

  • 2 weeks later...
Hi there,

I just got the e-manage in my R33 skyline II (rb25det).The car running very bad and I couldn't tune it.Could you give me some idea please? Or tell me where can I go fix this problem please.

Thank you

What harnesses are you running....ignition, injection, boost?

If it's hooked up the ignition harness without using the diode trick, then your coils are probably already starting to get damaged.

Hi man

I just got an E-manage on a RB25DET .It running so terrible.I think it has the problem as what you show.And I don't know how to tune it.Could you show me the way how to fix this problem?Please?Now the car can't even run on the street.

Help please

Jack from melbourne

[email protected]

First step is to check that all the internal dial settings are correct, the 5 screw adjustments are set to 0 and it is wired up correctly.

If there is a problem with wiring or the dials it should be flashing error codes at you.

Plugging the unit in with everything set correctly and 0 correction will have no effect on the running of the car. I have wired up 3 engines, rb20, rb25 and ca18 with no problems on start up.

Hi man,It's me again

Thank you for your reply.

I already have a quick check on the ECU there.The connetion and the setting is corret.And I set it to all 0 it comes up the sam thing.The RPM very low and no power run at all.

Please give me more opinions or show me where can I find someone to tune it.

Thanks

Jack

Hi man,It's me again

Thank you for your reply.

I already have a quick check on the ECU there.The connetion and the setting is corret.And I set it to all 0 it comes up the sam thing.The RPM very low and no power run at all.

Please give me more opinions or show me where can I find someone to tune it.

Thanks

Jack

Jack,

Your best bet is to ring around the tuners in your city until you find someone who has tuned an Emanage before or is willing to have a crack at it.

Hey I'm in the process of looking at getting some bigger injectors to get fitted along with an Emanage and was wondering which ones are the best to use? Sard make 550cc injectors, Nismo and HKS make 555cc injectors. 555cc is right on the limit of the 150% increase over the stock 370cc injectors that the Emanage/rb engine can handle so would they still be OK? By the way my engine is an RB25DET and it's also an auto.

Hey I'm in the process of looking at getting some bigger injectors to get fitted along with an Emanage and was wondering which ones are the best to use? Sard make 550cc injectors, Nismo and HKS make 555cc injectors. 555cc is right on the limit of the 150% increase over the stock 370cc injectors that the Emanage/rb engine can handle so would they still be OK? By the way my engine is an RB25DET and it's also an auto.

How much power are you targetting? If under 500 bhp, then SR20DET JDM manual injectors are worth considering.:D

Hey I'm in the process of looking at getting some bigger injectors to get fitted along with an Emanage and was wondering which ones are the best to use? Sard make 550cc injectors, Nismo and HKS make 555cc injectors. 555cc is right on the limit of the 150% increase over the stock 370cc injectors that the Emanage/rb engine can handle so would they still be OK? By the way my engine is an RB25DET and it's also an auto.

With the e-manage it's the fact that the ECU adjusts the AFM voltage to 'trick' the ECU into providing less duty cycle to the injectors, the down side of this is the fact the ECU also thinks the car is under less load and as a result is using a load point on the factory MAP that has a lot more timing advance than normal. The bigger the injector size, the more timing the ECU advances, until a point where the advance is just too much for boost/load conditions.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...