Jump to content
SAU Community

Recommended Posts

Daily! I had two cars before the other one being a 1.6 pulsar great on fuel. But everytime i drove that i got bored and annoyed and wanted to be in the r32 so i sold the pulsar so i could at more mods to the 32

Edited by polak_32
  • Replies 90
  • Created
  • Last Reply

Top Posters In This Topic

daily driven 40 each way to and from work and and any other running we do its nearly always in the line .. why bother having a piece of motoring history to have it hidden away in a garage nearly all the time... its more econimical than my commonwhore was

I don't have a Skyline, but I have a 180sx, which is probably driven 2 to 3 times a month. I is more of a fun car and not really practical nor safe on the road. We got a daily to get to and from work. If I had a R33 or R34, I wold probably drive it more often. The build quality of Skylines are alot better. Another thing I have found is that because I don't drive the 180 around very often, I tend to enjoy the drive more in what would otherwise be a very uncomfortable car, especially on rough Aussie roads.

Jon

i just use mine on weekends mainly.. the trade off is getting to ride on the trains on weekdays..... :D can i just ask... how bloody hard is it for people to put deodorant on in the mornings ?? i dunno bout other states but in vic the trains are a cespool of disease

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...