Jump to content
SAU Community

Recommended Posts

The 350Z disc cannot be used on the Skyline because of the different hat heights, the 324mm Skyline disc must be used and I understand that the two calipers use different size mounting bolts.

So assuming these are the only differences (to the best of my knowledge) then fitting 350Z calipers would not be an insurmountable task (in conjunction with the GTR33/34 disc) but unless you could pick up the 350 calipers at a bargain price I would suggest using the GTR calipers and saving yourself the hassle

the 350z/ v35 skyline ones use a m14 bolt to mount them where as 33/34 gtr uses a m12.

and ther offset of the skyline ones is off by about 3-4mm.

i tried fitting 33/34 brembos on a v35 and the bolts went big enough and the caliper rubbed on the outer face of the disc :

hope that helps.

ps... you can bolt them up but youd need the matching discs with the calipers.

Thanks guys, thats helpful. I'm interested because a company in the US called RacingBrake has released a 6 pot caliper/adapter/disc/pad set for the 350Z/G35 that's about AUD 2500.

http://www.racingbrake.com/350Z_G35_03_05_...026-311-611.htm

Being the US they don't have access to GTRs like we do so I thought I'd see if anyone knew if they were compatible.

Regards

Edited by Scooby

I think this all got answered, but like t04 said the only difference is the thread on the bolts. Just match calipers to discs and it should be fine. I just never got around to getting bolts the right length

  • 4 years later...

Bit of an old thread bump.

Just want to confirm what I am reading.

If you got a complete front aftermarket brake kit with calipers, rotors and brackets made for the G35/350Z, it would bolt onto a R32/R33 Skyline if you had the brackets have M14 holes on one end for the caliper and M12 holes on the other end to bolt onto the hub correct?

  • 1 year later...

hmmm, interesting.

looking for the same answers for the same reasons...

so, to sumerise, get a complete kit, and it should fit..

is that it?

might have to take the plunge, and try for myself.

if i do, will put up a write up.

Im running r34 brembos on the front of my Stagea which is the same as a v35/350z in the brake department. The offset may be different but other than that they are the same calliper. Just make sure you get the disks from the model the callipers are from.

I have a spare front seal kit for these these brembos if anyone needs one.

How similar are the Brembo brakes that came on 350Z's and R33 / R34's?

In the front they both run DB1520 pads and the rears run DB1521 - so if the pads are the same they they must be very similar.

The difference seems to be in the disk offset as shown in the attached link http://www.skylinesaustralia.com/forums/index.php?app=core&module=attach&section=attach&attach_rel_module=post&attach_id=41147

So the big question is:

Are the seal kits interchangeable as you can buy factory kits for 350Z's from the US for a very good price?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...