Jump to content
SAU Community

Jackets... Get Your Supercool Sau Vic Jackets...


Recommended Posts

All

Jackets have been ordered - we expect to have them available mid-July (before Drift for Dummies).

I'll post the production mockup pix when I have them back from the manufacturer - but for now, you'll just have to trust me that these will look ace :P

They are a 2-part polar fleece vest and jacket that can be worn separately, or as one cosy set.

They are black with grey panels and reflective piping.

We are ordering 50 - in a range of sizes from S to XXL

We will have some sizing samples at the Midnight Cruise - and I'll try to arrange something for next week too.

size_JK_18_1.gif

size_JK_18_2.gif

In the mean time - I would like people to reseve sizes, and ideally pre-order/pre-pay for these (to help our cashflow). So....

Normal cost:

$120 for members

$160 for non-members

Pre-pay members = $115

Pre-pay non members = $150

Important note - the pre-pay price is only valid if you PAY. Pre orders are fine and great for us to order sizes correctly, but unless you pay before delivery - the costs are the normal ones. This is entirely due to cashflow reasons - and there will be no exceptions.

Payment via EFT only

You must use the following format for your deposit: "JACKET FORUM NAME" (Eg, JACKET Jamezilla)

Bank: Westpac

Name: Skylines Australia - Victoria

BSB: 033305

Account: 265609

Thanks

James

post-936-1153303159.jpg

post-936-1153303174.jpg

  • Replies 279
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

ORDERS

Jamezilla = M & L (PAID)

Snowman = M & S (PAID)

Age = XL

LeeWah = S (PAID)

rchoo = M

phunkey_monkey = XL (PAID)

GTR-Geoff = XXL (PAID)

MissJuz = S (PAID)

Ant95 = M (PAID)

Joel = L (PAID)

Ash = M & M (PAID)

Jetdat = M (PAID)

Crispy = L (PAID)

Saff = M (PAID)

Dezz = M & S (PAID)

Dark = L (PAID)

Al = XXL (PAID)

Daz = XL

Blackrex = XXL (PAID)

Skybee = L

Crack = XL

Mav = L (PAID)

West = S (PAID)

Yug = XL

Jack = XXL (PAID)

ScottA = XL (PAID)

Sarah = M (PAID)

Driver Dynamics = XL (PAID)

Will = M (PAID)

Scotty = L

Greg = L (PAID)

Shiv = S

Jackie = S (PAID)

Bec = L (PAID)

Adz = L (PAID)

Pete = M & S (PAID)

Danny =XXL (PAID)

Roy = M

Scotsman = L

AlexCim = M (PAID)

Gareth (gaffa) = XL (PAID)

Babia = M (PAID)

Tekin = XL (PAID)

Ryan = XL (PAID)

Paul = L (PAID)

Justin911 = M

Nige = M

gdogzgtr = M

thebuzz = M (PAID)

CNBLOW = XL (PAID)

JVP-R32 = XL (PAID)

R32_BigBalls = XL (PAID)

Adam (Tuspeed) = XL (PAID)

Aaron (Rampant) = XXL (PAID)

Ben (JSpec) = XXL (PAID)

Craig (JSpec) = XXL (PAID)

Total = 61

Geoff - I am waiting on the pre-production comps to come back but...

Handsome Dan here is modeling the jacket type:

jacket.jpgJK_18_large.jpg

And below are the artwork proofs - showing left sleeve, right sleeve, back, jacket front and vest front (vest back is the same as the jacket)

J

post-936-1150961848.jpg

Hi James....long time no see mate.....def. put me down for one of these. I'm thinking if you are going the L then I'll be either a L or M.

Just keep us updated on fits so I can narrow it closer to the order

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...