Jump to content
SAU Community

Recommended Posts

Well this a very simple and easy, but it thought why not post up a DIY on it just in case you've never done it before.

Ok here's the wiper blades i use....

wp87ln.jpg

And yes they come in different colors......

http://www.aunger.com.au/hidden/item_3ff8a...4123127014.html

http://www.aunger.com.au/hidden/item_3ff8a...c808842619.html

http://www.aunger.com.au/hidden/item_3ff8a...e095973787.html

http://www.aunger.com.au/hidden/item_3ff8a...d845084175.html

http://www.aunger.com.au/hidden/item_3ff8a...2127621934.html

Step 1

Remove the old blades by pushing these metal 'clips' and pull the old blades down and off.

wp76qi.jpg

Step 2

Now slide the new blades on....using the gooves in the new blades to run through all the clips of the wiper

wp57ol.jpg

Step 3

OK with the new blades on, you'll now have alot of over hanging blades....

wp41wd.jpg

Out come the pliers or old scissors (not the good scissors!!!!!! :) )

wp32vs.jpg

And cut away.....

wp28ka.jpg

Job Done 8)

wp17zh.jpg

Now off to the dyno for the re-tune.

(this was done on my WRX :) )

Also just a quick tip, for having a really clean outside window, use a little Meguiars clay bar on the windscreen, it cleans it up awesome!!

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/127177-changing-your-wiper-blades/
Share on other sites

they come in either 6mm or 8mm. buy the correct one. the aunger ones are both 6 and 8mm, so they should fit anything.

Be careful using those plastic cut it yourself ones. they might slip off. if that happens, your window will get scratched.

Best stick with the metal insert ones.

I would suggest staying away from the wipers you get from Big W etc etc

Get the blades with the metal inserts, they are much quieter and wipe much more better.

I have wasted my time on crappy wipers which have annoyed the hell out of me. Spent $23 on genuine Nissan wipers and will never look back.

Quiet, smooth and wipes everything off in one swipe. hahah

As I said above, quieter and better wiping isn't the main problem. If the non metal one slips out, the arm will scratch the window.

I have this nasty scratch on my daily driver's windscreen. Mum must have driven with a broken blade for like 5 years or something.

BTW, You don' ahve to spend 23$ ffor genuine nissan ones. Nissan don't make wiper blades. Bosch - avaialble at supercheap auto make metal insert ones. Just get the right length ones.

  • 3 months later...
  • 1 year later...

So, as the links don't work.

Please show me lead me to where to get some new blades.

I've got 3 10+ year old cars that have never had them changed. I can't see in the rain.

Let me know and recommend.

Also, will i just be able to buy the same ones and fit on all the cars?

Edited by Owgasm
Anybody help me lol. I don't care about stickers lol.

Most auto stores stock them. Super Cheap have the Aunger and Bosch refills, both of which i have tried and recommend.

Make sure you measure the longest wiper so that you get the right sized refills,

and choose the brand that comes with a free sticker............. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
    • Being a manual, we very quickly ordered new R34 gearbox (From Nissan) and remaining parts from Kudos motorsports. Would highly recommend the team there. Ultra helpful and quick to share advice and upgrades. We are in the middle of taking the Auto out (Genuine 94,000/kms) and putting the Manual in this weekend. Part 2 of the build will include likely a Plazaman Intercooler and Plenium, Hks Exhaust with Tomei Dump (ordered).
×
×
  • Create New...