Jump to content
SAU Community

Recommended Posts

  • Replies 173
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

you sure? i was just counting in my head, but i call it 10. oh well.

for me it's.

kink = 1

left hander to go under the bridge = 2

right hander = 3

right hander with massive dip = 4

over the bridge = 5

right hand of the S = 6

left hander = 7

left hander = 8

flip flop i guess you could say is 2 turns not 1, so that = 9,10

and then left hander on to the straight, (pictured) = 10 or 11 depending on your point of view. I dunno how you get to 12 though.

OMG somthing magic happend. I am wrong. appologies. apparently some people call the right hander with the big dip 4, and the exit up it up the hill to the bridge 5. then the brige exit 6. sorry, right you are. turn 12 is the last turn. :yes:

yes, I dont see much wrong with that line. Turn 10 has a late apex.

w00t i have someone on my side!!! :laugh:

yeh i love that last corner, late braking and just plant it in hoping u dont drift too wide and scrap the wall lol

Apparantly my car wasn't at oran park. Noone seems to have any photo's of it at all. Not even power play :O

Yeah we do of it parked and pretty sure on the track aswell :laugh:

See what andrew can find tonite and send you some if you like!

i think this is you IMG_2466.jpg

I know this is you...

IMG_2240.jpg

IMG_2233.jpg

zomg and again

IMG_2496.jpg

see plenty, there is still a few more of you on here http://s40.photobucket.com/albums/e236/alt...%20Day/?start=0 i snapped up every pic of you from page 14 onwards...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...