Jump to content
SAU Community

My Latest 'mod' To The Gtr

Z1LLA

By Z1LLA,
in Victoria

 Share

Recommended Posts

Z1LLA Proficient

Z1LLA

Posted
Posted

Hey guys,

During the week I had the stupid/crazy idea of getting Mark Skaife/Jim Richards to sign the glovebox lid from the GT-R the next time the V8 Supercars were in Melbourne. With the Sandown 500 on this weekend, it was as good a time as any, so I went along today with the high hope of getting them to sign it. Here is the result :P

image056gl0.jpg

I got Jim Richards to sign it when he returned from his Porsche cup practice session and he was great about it, when I told him it was for my GT-R he said "Oh Top Stuff" and happily signed it and the cases of two 1:43 scale race GT-Rs I have too.

Mark Skaife was a much harder man to catch, after waiting patiently along the fence near their trucks, after nearly an hour I decided to walk into the fenced off pit area behind the pit garages and track him down. Luckily I did only a couple of minutes later. He seemed very busy and not that interested at all, but I expected it (and fair enough he does have a lot of stuff on) but I still told him how much I appreciated it.

Anyways just thought I'd share the pic, I thought if all the HDT/HSV owners do it with Brocky etc, I can do the same with my car, and I don't think too many GT-Rs would have that sort of thing.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/132556-my-latest-mod-to-the-gtr/
Share on other sites
Z1LLA Proficient

Z1LLA

Posted
  • Author
Posted

Thanks for the comments guys.

Didn't do it to raise the value of the car, I don't believe it has/will, would be better off getting a standard glovebox and selling that one on ebay or something if I ever sold the car haha.

But I guess it does make the car a little bit more unique compared to the other ones out there.

Couldn't really embroid it as its hard plastic? And yeah Skaife sure is very hard to get hold of, I was lucky I reckon :P

Cheers

700HP-GTR33 Mentor

700HP-GTR33

Posted
Posted
Thanks for the comments guys.

Didn't do it to raise the value of the car, I don't believe it has/will, would be better off getting a standard glovebox and selling that one on ebay or something if I ever sold the car haha.

But I guess it does make the car a little bit more unique compared to the other ones out there.

Couldn't really embroid it as its hard plastic? And yeah Skaife sure is very hard to get hold of, I was lucky I reckon :D

Cheers

Hi again' I have a Noval idea.

Get both of them to autograph our stickers before we get them made.

That way we get their signature displayed on all our Skylines.

We could pass them a couple of bucks and say that they have made their previous followers and

current ones :P really happy.

dezz Grand Master

dezz

Posted
Posted
dan's from WA... they're a bit behind.

teh cool word in vic is "tops"

tops idea with the glovebox.

its the word in vic...i wouldnt go so far as to call it cool ....

I used to be a ford forum member, and a lot of the guys there get there engine or rocker covers signed by v8 supercar drivers etc....never really thought about doing it on a skyline, but I guess you got 2 relevant signatures :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • MBS206
      Jacks that fit under GTR lips that can reach the subframe?

      By MBS206 · Posted

      For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • MBS206
      NC MX5

      By MBS206 · Posted

      Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • turbo76lx
      Torana Lx Gtr Hatch, Lots Of Pictures

      By turbo76lx · Posted

      Sorry I meant that we are building the EH for a client.
    • The Bogan
      Torana Lx Gtr Hatch, Lots Of Pictures

      By The Bogan · Posted

      LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...