Jump to content
SAU Community

Recommended Posts

Whats the face for :kiss:

Cause you're confusing! one minute you say you were driving after the accident.. no shakes nothing.. the next that you're scared and want a beemer.. then that you want a 350kw skyline!

Is that directed at me?!?!?! :)

nope.. i'd say its directed at the driver!

  • Replies 220
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Cause you're confusing! one minute you say you were driving after the accident.. no shakes nothing.. the next that you're scared and want a beemer.. then that you want a 350kw skyline!

Well i was joking with the skyline and after the accident we werent shaking and after we got out of hospital my mate did drive us home in my r32 gtr.

man you guys are soooooo lucky......

guess the driver wasn't though and certainly wont be after everyone reads all of this.....

glad you crawled away with just a few minor injuries.....

seen much worse from less..............

DAm!!! i have been steadly saving up for this car ...even sold my GTR and this has happened.... Good luck with the whole crashing process. Its a slow tedius harsh lesson to lean the hard way.

RIP Morgz Godzilla .... Another one down !

Well i was joking with the skyline and after the accident we werent shaking and after we got out of hospital my mate did drive us home in my r32 gtr.

FOR EVERYBODYS INFORMATION THE ASIAN BLOKE THAT WAS DRIVING THE CAR WAS A COMPLETE MORON AND SHOULD HAVE THOUGHT TWICE BEFORE DRIVING THAT FAST ON A NOTORIOUSLY WINDY ROAD!!!! AND HIS SISTER DROVE ALL HIS MATES HOME... JUST WANT TO CLEAR UP HIS STORY. HIS MATES WERE STILL A BIT SHAKEN FROM THE ACCIDENT, HIS MUM ABSOLUTELY SHIT HERSELF (AND WHOS MUM WOULDNT) SO THATS WHY HIS SISTER DROVE THEM HOME....AND AS FOR BUYING ANOTHER CAR I THINK THAT YOU SHOULD BUY YOURSELF SOMETHING SAFER, A VOLVO MAYBE... TAKES ALOT TO OVER TURN THAT!!!!!

FOR EVERYBODYS INFORMATION THE ASIAN BLOKE THAT WAS DRIVING THE CAR WAS A COMPLETE MORON AND SHOULD HAVE THOUGHT TWICE BEFORE DRIVING THAT FAST ON A NOTORIOUSLY WINDY ROAD!!!! AND HIS SISTER DROVE ALL HIS MATES HOME... JUST WANT TO CLEAR UP HIS STORY. HIS MATES WERE STILL A BIT SHAKEN FROM THE ACCIDENT, HIS MUM ABSOLUTELY SHIT HERSELF (AND WHOS MUM WOULDNT) SO THATS WHY HIS SISTER DROVE THEM HOME....AND AS FOR BUYING ANOTHER CAR I THINK THAT YOU SHOULD BUY YOURSELF SOMETHING SAFER, A VOLVO MAYBE... TAKES ALOT TO OVER TURN THAT!!!!!

dude... you do realise grkgtr was not the one driving the car.. right?

are you the drivers friend?! were you in the car?! i thought he had potential drivers in the car, not mates?

Lol.. I drive through that area and stretch of road once, sometimes three or more times a day.

And going 140 through there is...possible if you have all the lanes to yourself.. but, it's not like that haha what a stupid fool.. 140... He must have missed the big red sign that said REDUCE SPEED.

Atleast they're all ok, and no kids got hurt. When I actually think about it.. I must have missed this accident by a few minutes.. I was driving through there yesterday just 15 mins before the poster said it happened. Probably best I wasn't around.. more reason for him to show off..

EDIT: it looks like he actually came from Double Bay back streets and fired up the little hill towards where you merge. There's a little round about there.. maybe he tried to gun it out of the roundabout.. lost it.. gave it more... and i dunno...

dude... you do realise grkgtr was not the one driving the car.. right?

are you the drivers friend?! were you in the car?! i thought he had potential drivers in the car, not mates?

Yep i know for sure that he wasnt driving the car.... as i said the moronated asian bloke was driving, and mastered the art of crashing a car..... with maximum damage! Im GRKGTR's sister. he only had 1 potential buyer in the car not three, my brother was the potential buyer, his mates came with him because he couldnt drive as he has lost his license. lucky for him his mates were there to drag him out of the car.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...