Jump to content
SAU Community

Recommended Posts

I was wondering when i would start seeing the mods start changing into rebuilds. One only has to look at the muscle car scene to see where we're headed.

Excellent work and great commitment Deren. Ant idea how much $$$ you saved by stripping and reassembling it your self?

Thanks mate, your right about the rebuilds. I would have saved thousands doing all the labour myself. Considering your average workshop charges $80 an hour. Im a mechanic so its pretty handy when doing something like this.

Cheers guys, i have had the blower fan, evaporator, and heater core all out for cleaning and inspection over the last week or so. All looks good so i fitted a new TX valve and flushed everything out bit by bit. All going back together at the moment. Also painted up the condensor to freshen it up a bit. Gonna put in a new receiver dryer of course :P

post-14108-1163499595.jpg

Well yeah thats the problem ive come accross. i want to be able to use this car but its hard to bring yourself to even drive the thing after so much time and money have been poured into it. I do plan at least to go to the drags with my new engine in etc, but was planning to go for a few laps during (hopefully) quiet time on a circuit.. Just have to be clear of other cars especially if they are behind me!

Don't forgot to do a few thousand k's of running it in.....I'm sure you already knew that ;)

ooooo, all shiny, my alt/fan belt always squeaks coz its a PITA trying to get the right tension settings on it :P and the last thing I want is no squeak but its too tight.

Well yeah thats the problem ive come accross. i want to be able to use this car but its hard to bring yourself to even drive the thing after so much time and money have been poured into it. I do plan at least to go to the drags with my new engine in etc, but was planning to go for a few laps during (hopefully) quiet time on a circuit.. Just have to be clear of other cars especially if they are behind me!

Just buy two of them, you would be mad to put this much time and money into this and then take it to the track....what if you roll it into the kitty litter or something :(

Race only imports are dirt cheap, gtr under $10k landed

Well yeah thats the problem ive come accross. i want to be able to use this car but its hard to bring yourself to even drive the thing after so much time and money have been poured into it. I do plan at least to go to the drags with my new engine in etc, but was planning to go for a few laps during (hopefully) quiet time on a circuit.. Just have to be clear of other cars especially if they are behind me!

What did the alternator cost to get redone? and where did u get it done?

Yeah i hear ya guys..Would be bad news if anything happenend once it was finished :rofl: Anyway i'll see what i decide when it comes to that time..

Alternator was $165 All i got them to do was clean it up and a new set of bearings. Brushes were only 50% used... Think i'll do the starter myself..Cant be too hard? Im not sure what to do with the P/S pump. Thinking to just give it a coat of paint to bring it up more uniform...Also theres the matter of the A/C compressor...thinking to flush it with some solvent and work it thru but theres always the option of getting it serviced and checked over...Then that costs more money...What do u guys think?

PS: Alt was done at wynnum car electrics on Tingal Rd. Wynnum

Edited by Godzilla32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...