Jump to content
SAU Community

Recommended Posts

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

hmmmm....i wonder how many "genuine Z-tunes" we'll be seeing from now on.

sigsputnik - while there have been plenty of N1 and 400r copies out there in the past I'd suggest that this would be a lot harder to replicate. Add to that the fact that only a Ztune owner can get hold of certain replacement parts and the cost of producing them is so expensive.

The Z-tune is substantially more than just an r34 with a few go fast bits.

It has been completely overhauled. The engine is completely rebuilt, modified and tuned to 500ps, It has different brakes, suspension, coolers, aero parts, interior. The whole car is pretty much redone!

I believe it was made as a limited/anniversary edition to be the best a skyline could be.

Its a definate weapon.

The Z-tune is substantially more than just an r34 with a few go fast bits.

It has been completely overhauled. The engine is completely rebuilt, modified and tuned to 500ps, It has different brakes, suspension, coolers, aero parts, interior. The whole car is pretty much redone!

I believe it was made as a limited/anniversary edition to be the best a skyline could be.

Its a definate weapon.

V Spec's were bought back my Nismo and turned into Z Tunes, 20 Made the cut, pretty sure thats all they made....

As a std car its great. It does everything damn well and as far as std production cars go it was easily the quickest thing at Dutton.

Problem is though, it does not take a lot to get a lesser car to go quicker...there were events where it was only 1 second quicker then me...and thinking about it thats the launch through first gear as my car has a dead diff and std RB20 box so i cant launch the thing they way i would like.

Its a great car, but if either of the two R34 GTRs getting around Vic had entered they would have both shown it a clear set of heels. So can be doen cheaper and better in the aftermarket. Actually there awere several events where an SAU forum member in his relatively std R33 VSpec was quicker in a number of events. And you cant blame the driver either as the guy driving the Z Tune is an ex works Audi driver, V8 Supercar driver Carrera Cup guy...its just not as quick/goof as you would hope

yeah - big car, smallish circuits and stuff like that, it wasnt ultimatly suited for it

mayber better for a bigger circuit like barbegello, bathurst, winton, etc - all the bigger v8 circuits

Even still , Sandown is a big track and JAGR33 is his well sorted GTR is around 3-4 seconds quicker. And again, both drivers of the Z Tune have way more experience then him around Sandown.

Its quick, but its still a production car...and plenty of modded forum cars would be quicker...and no way the thing will run 10s...no way

  • 3 weeks later...
Was just flicking through the powerplay gallery...

http://www.powerplayimports.com/minigal/in...2006&page=8

So that's what they did with the kickbacks... :)

:( I've been waiting for something like this to pop up... different AWB to the idiots in the headlines

THERE IS ONLY ONE IN AUSTRALIA.

IVE SEEN HIM IN MY AREA 10-12 TIMES IN THE LAST MONTH - 6 WEEKS

THIS LEADS ME TO BELIEVE HE LIVES IN THE EASTERN SUBURBS ITS SO MUCH HOTTER IN THE FLESH THAN IT IS IN YOUR AUTOSALON MAGAZINE.

IT FASTER THAN FERRARI ENZO, MCLAREN F1 EVEN f**kEN BUGATTI VEYRON

ITS LIKE THE NEW SUPER CAR KILLER YEAH

IF I HAD 200K ID BUY IT FOR SURE

Edited by GUN_METAL_GTR32
THERE IS ONLY ONE IN AUSTRALIA.

IVE SEEN HIM IN MY AREA 10-12 TIMES IN THE LAST MONTH - 6 WEEKS

THIS LEADS ME TO BELIEVE HE LIVES IN THE EASTERN SUBURBS ITS SO MUCH HOTTER IN THE FLESH THAN IT IS IN YOUR AUTOSALON MAGAZINE.

IT FASTER THAN FERRARI ENZO, MCLAREN F1 EVEN f**kEN BUGATTI VEYRON

ITS LIKE THE NEW SUPER CAR KILLER YEAH

IF I HAD 200K ID BUY IT FOR SURE

well in theory it is faster than mclaren I guess..not sure if its true if tested..Mclaren has time as as fast as 9s every now and then...Veryon also high 9s

Nissan promised Z tune to be sumwhere in the 10s, but I'd think it'll be high 10s..

yes there is only 1 Z tune in W.A

they only produced a total of 20 cars

so chances are that'll be the only one in Australia ever

no there is no Z tune in W.A

I've seen Steves 34 in the flesh at the track, the street and in a show and it is nice but having the bragging rights, the resale value, the collectability on top of that, the mechanical and aero of a Z-Tune...its a winner.

Z-tune is the GTR to have. yes there is faster GTR out there at less than half the price. but the Z-tune is special. If I could afford one, I would have had one by now.

THERE IS ONLY ONE IN AUSTRALIA.

IVE SEEN HIM IN MY AREA 10-12 TIMES IN THE LAST MONTH - 6 WEEKS

THIS LEADS ME TO BELIEVE HE LIVES IN THE EASTERN SUBURBS ITS SO MUCH HOTTER IN THE FLESH THAN IT IS IN YOUR AUTOSALON MAGAZINE.

IT FASTER THAN FERRARI ENZO, MCLAREN F1 EVEN f**kEN BUGATTI VEYRON

ITS LIKE THE NEW SUPER CAR KILLER YEAH

IF I HAD 200K ID BUY IT FOR SURE

WHAT??? I DIDN'T QUITE HEAR YOU!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...