Jump to content
SAU Community

Recommended Posts

I've driven a good few jap performance cars and gearboxes vary greatly.

Which cars have impressed you with their feel and operation, and which others were shithouse.

I'm really asking about feel as opposed to the internal stregth and glass vs tough as nails gearboxes.

How does a 33 skyline box say pull up next to a RZ Supra 6 speed?

I've found that GTiR boxes are horrible, it seems like you can snap the stick off at any stage and it's really springy.

WRX's boxes were alright.. though I prefer the notchy throw of a skyline better.

S4 rx7's are crap too.. and everyone who I've let have a fang of my car mis shifts and speak poorly of it.

Link to comment
https://www.sau.com.au/forums/topic/146894-great-feeling-gearboxes/
Share on other sites

Lol the box in my 96 r33 is getting abit tired, and by tired im mean shit house.

Each gear change is accompanied by a nice "crunch" as the gear is selected..... *sigh* if only i could afford to get a new box or just the synchros replaced in mine.

cheers

For some reason I've found in general over cars of all age, FWD gearboxes tend to be smoother than a RWD counterpart. Why, I dont know (maybe because the gearsets are smaller and thus less syncro work) but the S2000/MX5/350Z are nice to use!

Feel of the MY04+ WRX box is nice imo, a bit clunky at times but probably more due to AWD+being new to it. I have also found FWD boxes smoother however one of the nicest feeling in terms of throw and takeup would have to be a mx-5.

Easily the S2000. Snap, snap, snap and away you go. Nice and short throw. The R32 GTR was pretty alright too but throw is not as nice as the S2000. MX5 was also pretty good (6 speed box).

My old 94 WRX was too notchy, didn't like it much. But the worst has to be the new VW Golf DSG sequential box. Takes about a second/second and a half to change gears once you hit the paddle.

Easily the S2000. Snap, snap, snap and away you go. Nice and short throw. The R32 GTR was pretty alright too but throw is not as nice as the S2000. MX5 was also pretty good (6 speed box).

vouching for MX5 6 speed, nice and short engagement, i prefer it over my r34's

I don't mind the 350Z box. Its a bit heavy, but its got a relatively good feel.

I also quite liked the manual in the new MX5 I test drove recently.

I don't like the DC5 Type-R's gearbox (no matter what the journos say). Actually, I'm hard pressed to think of a FWD gearbox I actually like. All the ones I've ever driven (Satria, Lancer, Mazda 323, Pulsar, Integra) have been pretty sloppy.

Edited by scathing

I was impressed with the Renault Clio Club - 2L. Not sure of renault models but this one was click click click. The stock clutch in it was even pretty 'race inspired', I stalled it a few times cos it was so springy... Either way the box lets you shift like a meth head.

But the worst has to be the new VW Golf DSG sequential box. Takes about a second/second and a half to change gears once you hit the paddle.

Are you kidding? My bro has a Golf GTi and the DSG is the best gearbox I have EVER experienced, it shifted faster and most smoothly than anything I have ever felt, if it's taking a second to shift there's something seriously wrong with it...

I don't know how the Skyline gearbox is, but the Supra 6spd Getrag unit is really clunky, it's very solid and you can certainly feel it when driving, it's not a super refined box, but you get that from a racing box.

Are you kidding? My bro has a Golf GTi and the DSG is the best gearbox I have EVER experienced, it shifted faster and most smoothly than anything I have ever felt, if it's taking a second to shift there's something seriously wrong with it...

The model I test drive was the 5 speed semi-auto TDi. It was simply too slow. The TDi and the GTi probably have different boxes. I also test drove the Mazda 6 and the Honda Euro and their boxes are much quicker. Thus I ordered the Euro.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...