Jump to content
SAU Community

Recommended Posts

nice looking curve indeed. for me, i reckon with the track use you give it i wouldn't mind a little more fuel up top. shape of the afr is no problem though, as long as the power curve is good (which it is). the boost curve could be better though. something is not quite right with that.

drop of 2psi on the boost curve

ruler flat boost curve would be nice but not necessary IMO. A drop of 2psi simply means your turbo's not working quite so hard at high RPM and that's where things start to fly apart. It just means you can run 2psi more boost in the midrange!! :D

The boost curve is my fault. I haven't adjusted the actuator enough. I will fix that.

As for more boost. I didn't try it but I doubt the turbo has much left in it so I didn't think to bother giving it a go.

Very nice curve Adam! I think this may have just swayed me to take my car to Unigroup when I get my tuned done. I'm was still deciding between them, Hitman or Powertune.

Do you mind listing what mods you have done to the car?

Rebuilt engine with Wiseco forged pistons and Tomei Type B, 260/260 Poncams. Running 8:75:1 compression ratio.

Blitz LM intercooler

Apexi pod (only because the stock airbox is such a pain to remove and refit all the time, the stock one was no restriction)

Nismo 480cc injectors at an occasional 100%

R34 GTR fuel pump and regulator

GCG highflow turbo

CES split dump/front pipe

Fujitsubo cat back (quiet one)

3" cat in since compliance

Apexi AVC-R

PFC

That's the power mods.

As far as Unigroup are concerned. They really involved me in the process which I liked. Of course you can drop you car off and pick it up 3 days later running perfectly but I like to fiddle and I like to learn. Yavuz (if i spelled his name right) is definitely a perfectionist but he doesn't think you will take his job if he teaches you something. He keeps no secrets.

Excellent, thanks! :D

Hmm I was thinking of going 260 poncams as well but if you're hitting 100% at 272kw I think I should stick to 250 because I've only got 440cc injectors. Thanks for the reminder, I think its just saved me quite abit of money. :D

i'm not sure I can see this direct correlation between cam duration, and injector duty cycle? injector duty cycle is controlled by one thing only. the numbers inputted into the CPU. the size of injectors required is controlled by one relationship only. the amount of air you are stuffing into the engine, vs the air fuel ratio you want to maintain.

lol, so you didn't cave when he told you to wind up the boost some more?

It's times like this i regret getting rid of my highflow and sticking the hks manifold and t300s on. So much work, so little gain....but I still have 2 more rwkw!

hi there just wondering how much did it cost?

cheers

They certainly know their stuff. I really enjoyed this one. I learnt a lot and the car is putting out a little more power, very safely, with nice smooth AFR's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...