Jump to content
SAU Community

Recommended Posts

my friends within the paddock have told me something interesting...

have you thought about the fact that the dirty sanchez ( as he will poetically forever be known to me as long as he races ) will stay at Mac?

both drivers have mentioned they dont want to drive along side each other again, but contractual clauses may otherwise prove that they must.

can you imagine that?

its not as far fetched as you may think.

even if i hated my team mate, i still have to do the bst job possible in spite of it and that may well be what happens after this season has reached its climax...

I said that a few pages ago. No doubt any successful F1 driver is a tqad arrogant and i dont think FA will run from the prospect of racing against Louise. If LH gets up then FA will want to prove next year he can beat him. If FA he will hang around and rub LH's nose in it for another season. Its win win for FA.

No doubt FA and his team of mechanics want to beat LH and his team of mechanics. FA knows its the ppl workign on his car that will get him accross the line....despite the media wanting you to think otherwise.

Also, the Nissan story does the round every 6-12 months. Perhaps because the Prodrive thing is shaky the Nissan/Prost thing is doing the rounds again., Be good to see it come off but i think Pat Symonds and Flavio have both said they are not in a position to support a customer car

  • Replies 2.1k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Anyone want to hinge a bet on Ralf scoring a seat at Williams????

Also with a wet race predicted for this weekend here is to hoping RBR/ Webber can get a good result ot finish off the year. The car has looked good in the wet recently, and i recall Webber doing good things at the Brazilian GP years ago on he Jaguar before he binned it coming onto the striaght.

Also a bit of carnage with the start may see Loiuse facing the wrong way courtesy of Massa, or a pretender SUtil/Vettel) tryign to get a result on the first corner :w00t:

Your forgetting team orders have been 'banned' since the shenanigans that occured in Austria (was it 2002?), basically Ferrari had no need to make Barichello pull over for Schumacher yet they asked him and he did... As far as I'm concerned, Ferrari f***ed the puppy right there, so yes, the FIA has in fact made it an issue, because of Ferrari's obviously unfair team orders, they (FIA) pounced...

Your forgetting team orders have been 'banned' since the shenanigans that occured in Austria (was it 2002?), basically Ferrari had no need to make Barichello pull over for Schumacher yet they asked him and he did... As far as I'm concerned, Ferrari f***ed the puppy right there, so yes, the FIA has in fact made it an issue, because of Ferrari's obviously unfair team orders, they (FIA) pounced...

my bad - the steam building in my head pushed out some memory.

I still think though, whether valid or not, the only reason they are doing this is to put pressure on Mac, and force mistakes leading to Mac not winning anything this year.

The reason is pretty simple

Ferrari = billions in revenue for the FIA. Imagine a season where Ferrari's golden boy is no longer there(schuey), and on top of that they fail to win anything. There will be hordes of bandwagon fans who jumped on the Schuey thing turn away from the sport. This equals lost revenue. How do the FIA fix this? Simple, hand Ferrari a constructors championship, and then do everything to destabilise it's nearest rival in order to get them a drivers championship as well. This way, Ferrari has it's new hero driver (Kimi) and all is well for at least another season.

Well personally I hope that Jackie Stewart sues Oswald, sorry Max Mosley for approximately 11ty billion dollars. the gives atleast $100 million of it back to McLaren.

As for parity & the FIA enforcing it on McLaren - people have apparently forgotten something. The whole issue of team orders only came into the spotlight because of a bullshit stunt that Ferrari pulled a number of years ago. Schumacher was streeting everyone at about the half way stage of the championship. But they still made his number two pull over on the last lap of the Austrian GP (I think, memory is a but dodgy) to ensure he got the extra 2 points.

Before that it had never been a problem for anyone.

Go Kimi. louise is a fag. alonso is a fag. kimi is the only one who knows how to get smashed at the strippers. hamilton will probably celebrate his first WDC by getting spooned by his daddy. alonso will do some stupid chicken dance or something, but at least kimi will get out there, score a nice bag of coke, few cases of champagne and paint the town red whilst banging a few groupies at every club he calls into.

Go Kimi. louise is a fag. alonso is a fag. kimi is the only one who knows how to get smashed at the strippers. hamilton will probably celebrate his first WDC by getting spooned by his daddy. alonso will do some stupid chicken dance or something, but at least kimi will get out there, score a nice bag of coke, few cases of champagne and paint the town red whilst banging a few groupies at every club he calls into.

Love your style Baron.

If you could choose anyone in the world to be your mate, he would easily be in your top 5.

Back up a bit. Nissan/Prost into F1= Great. Hyundai into F1= what?

I mean, I know Hyundai have done a great job in the last few models of the coupe but seriously? The reviews are favourable, and so is the price, but F1 is a whole different ball game. Still, they's probably just copy Ferrari and come out in a car that looked exactly the same, but only did 80 mph.

Now, I know this really is a very weak assumption, but let me relate a tidbit form the tube press a couple of days ago. They often print little lines without giving away the persons name, and this one said a current Brit sportsman who's doing well could be shaken up at the moment, because he's in danger of being "outed" by a former lover.

Now, these stories are often bullsh!t. I have never heard them to be true, but I assume they're pointed the gayday at Lewis, simply because he's pretty much the only English sportsman doing anything right..... unless it's wilkinson, but the rugby guys there are a little that way inclined anyhow.

Back up a bit. Nissan/Prost into F1= Great. Hyundai into F1= what?

I mean, I know Hyundai have done a great job in the last few models of the coupe but seriously? The reviews are favourable, and so is the price, but F1 is a whole different ball game. Still, they's probably just copy Ferrari and come out in a car that looked exactly the same, but only did 80 mph.

Now, I know this really is a very weak assumption, but let me relate a tidbit form the tube press a couple of days ago. They often print little lines without giving away the persons name, and this one said a current Brit sportsman who's doing well could be shaken up at the moment, because he's in danger of being "outed" by a former lover.

Now, these stories are often bullsh!t. I have never heard them to be true, but I assume they're pointed the gayday at Lewis, simply because he's pretty much the only English sportsman doing anything right..... unless it's wilkinson, but the rugby guys there are a little that way inclined anyhow.

Umm i don't see what production cars have in common with F1. I've never seen a open wheeler V8 powered car that does over 300 km at a dealership. So i fail to see how hyundai are any different from any other manufacture in F1. All it takes is money, they can recruit engineers and they would have plenty of their own people that could contribute to a F1 project.

Umm i don't see what production cars have in common with F1. I've never seen a open wheeler V8 powered car that does over 300 km at a dealership. So i fail to see how hyundai are any different from any other manufacture in F1. All it takes is money, they can recruit engineers and they would have plenty of their own people that could contribute to a F1 project.

Dunno occasionally an F5000 used to be put on the forecourt to drum up interest....

They could always re-badge someone elses work anyway. Wonder what John Judd is up to these days?

Edited by djr81

I doubt Nissan would be investing into F1 i know from 99-03 they had a net operating loss, i think even prior to 99 they were in alot of debt. Only from 03 till now they have been operating at a net profit, but it has hardly been enough to re-coup their debts and have enough to invest in such a sport as F1!

Umm i don't see what production cars have in common with F1. I've never seen a open wheeler V8 powered car that does over 300 km at a dealership. So i fail to see how hyundai are any different from any other manufacture in F1. All it takes is money, they can recruit engineers and they would have plenty of their own people that could contribute to a F1 project.

The way they are different is that they don't really have a platform that uses the technology that they would develop.

Ferrari uses spin off technology in their designs, McLaren have the McLaren Mercedes, BMW have high tech machines throughout their range, Ditto Renault. Even relative new comer Toyota has flagship machines that use the safety and performance features developed in the cars.

They can justify the outlay into the racing because they can research and develop new technologies that have practical applications, especially brakes, suspension and alternate construction materials.

Also, there is brand identity. Having a winning car that totes your brand is always good for business. The old adage "Win on sunday, sell on Monday" is true for everyone, provided there is a car that caters to the demographic of people that actually watch the race. (i.e. A fast car)

Unless Hyundai is going to make a flagship semi-supercar, raising their racing profile is just an exercise in idiocy.

The cost of implementing new technologies is passed onto the buyer. Hyundai have never really had a crack at the elite market, and they just don't have the reputation that would justify spending BMW like dollars on a Hyundai.

The only way it makes sense is if it's a very long term investment intended to raise their profile, and accordingly they add a whole new range of high performance vehicles. Much like Honda did I suppose, with the NSX when they supplied the engines for McLaren.

Oh, and it takes more than just money. See Toyota.

Edited by Kozeyekan
The way they are different is that they don't really have a platform that uses the technology that they would develop.

Ferrari uses spin off technology in their designs, McLaren have the McLaren Mercedes, BMW have high tech machines throughout their range, Ditto Renault. Even relative new comer Toyota has flagship machines that use the safety and performance features developed in the cars.

They can justify the outlay into the racing because they can research and develop new technologies that have practical applications, especially brakes, suspension and alternate construction materials.

Also, there is brand identity. Having a winning car that totes your brand is always good for business. The old adage "Win on sunday, sell on Monday" is true for everyone, provided there is a car that caters to the demographic of people that actually watch the race. (i.e. A fast car)

Unless Hyundai is going to make a flagship semi-supercar, raising their racing profile is just an exercise in idiocy.

The cost of implementing new technologies is passed onto the buyer. Hyundai have never really had a crack at the elite market, and they just don't have the reputation that would justify spending BMW like dollars on a Hyundai.

The only way it makes sense is if it's a very long term investment intended to raise their profile, and accordingly they add a whole new range of high performance vehicles. Much like Honda did I suppose, with the NSX when they supplied the engines for McLaren.

Oh, and it takes more than just money. See Toyota.

Very, very little of what is developed in F1 ever sees use in road cars. It is far too specialised & expensive. It is all about marketing & perception. Overwhelmingly any of the crumbs that do fall to the productions cars are from component suppliers, not the manufacturers direct.

Can anyone name one bit of equipment in the last 20 years that has made the transfer.

Semi auto gear changes? Wank factor that never works properly.

20,000rpm V8's? Not likely.

Carbon fibre anything? Older than 20 years & most manufacturers just use it for trim anyway.

Carbon brakes? Older than 20 years.

Push rods/monoshock front ends/torsion bars/third dampers/aero profile wishbones? Nup.

Do you think Frank Williams/Patrick Head give a flying fk about what the motor in next years Camry will be & whether it has variable fuel/ign maps to allow it to make it through to next weekend?

Take Honda for example. Their most useful end product of being in F1 is the training that it provides their engineers. Nothing more.

Hyandai is no more or less pedestrian than Renault or Toyota. Just another mainstream car maker. So why shouldn't they try & leverage F1's halo effect like the others do. The fact that they would be far better off going back to the WRC is perhaps something to note, however.

Sorry if that sounds offensive. I just have never believed that F1 needs to justify itself. No other sport appears to need to.

And yes it does take more than money. But I think Minardi proved that it does atleast take that.

Can anyone name one bit of equipment in the last 20 years that has made the transfer.

Semi auto gear changes? Wank factor that never works properly.

20,000rpm V8's? Not likely.

Carbon fibre anything? Older than 20 years & most manufacturers just use it for trim anyway.

Carbon brakes? Older than 20 years.

Push rods/monoshock front ends/torsion bars/third dampers/aero profile wishbones? Nup.

Ok I'll take a stab...how about variable valve timing and traction control/electronic stability control? I'm pretty sure both of those were developed in F1 and filtered down to road cars but I'm open to being proven wrong :thumbsup:

CVT (see Williams 1997 I think)..

Turbocharging (Renault 1977 - prior to this, only American strategic bombers/high altitude interceptors used turbocharging).

Mid mounted engines (Cooper did it in the late fifties/early sixties, now most modern supercars are MR/M4wd).

Ground Effect (Again, majority of supercars, and even many sportscars utilise under-car aero).

I'm sure there are other things I've missed as well...

CVT (see Williams 1997 I think)..

Turbocharging (Renault 1977 - prior to this, only American strategic bombers/high altitude interceptors used turbocharging).

Mid mounted engines (Cooper did it in the late fifties/early sixties, now most modern supercars are MR/M4wd).

Ground Effect (Again, majority of supercars, and even many sportscars utilise under-car aero).

I'm sure there are other things I've missed as well...

I did say the last 20 years, but anyway:

CVT: are only used in small cars.

Turbo's: Renault used them on their F1 cars in 1977. GM used them on their road cars in 1962 - the shitbox that was the Corvair.

Mid engines: Well to be honest I dont think the Fiat X1-9 owes anything much to what Charlie Cooper once did. In any case the Fiat used a transverse engine, the Cooper didn't.

Ground effects: Well designers have worried about aero approximately for ever. Ground effects implies a sealed side skirt which is something no road car has ever had.

Note there is a difference between invented & made fashionable.

Ferrari do put some watered down old F1 technology into their high end cars. Manetino tricky diff etc. Also the F50 was their first real road car where the engine was a structural stressed member in the chasis and the block was the same casting as the 3.5L F1 ....but thats about it.....it just proves how irrelivent F1 has become and always has been really.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...