Jump to content
SAU Community

Recommended Posts

Long motor includes bottom end and head and all internal parts but no accessories.

short motor is same as above minus the head, includes internal parts inside the block and sump.

It's obvious what you need for the det conversion.

ahh cheers thanks man jst what i needed to know

Does anyone know if you can use the High energy 7L sump and still retain the factory stone guard in a 32 GTST?

Also noticed that the drain plug is on the opposite side to factory.

http://www.skylinesaustralia.com/forums/in...t&id=140593

Edited by Alf

anyone had their crank nitrated? The shop rang me and asked if i wanted it done since the whole bottom end is getting blueprinted. Cost me $900 though! I want a tough realiable engine and am cutting no corners using argo rods, jun oil pump and ati balancer. Ive been told the block is weaker then rb26's. What can i do to strengthen it? Resin fill? Can someone shed some more light on this?

cheers

anyone had their crank nitrated? The shop rang me and asked if i wanted it done since the whole bottom end is getting blueprinted. Cost me $900 though! I want a tough realiable engine and am cutting no corners using argo rods, jun oil pump and ati balancer. Ive been told the block is weaker then rb26's. What can i do to strengthen it? Resin fill? Can someone shed some more light on this?

cheers

All RB cranks are nitrided standard.

Cheers

Gary

Hey all,

Just want to know what you guys did for the oil squirters did you put them in or not?

Bitch of a job, not all blocks will accept the threads and you can't tell until you start machining. S1, S2, Commodore, Skyline and turbo blocks, makes no difference, about 1 in 10 will take squirters. So we stopped fitting them about 60 RB30's ago, we machine oil squirters into the conrods, works perfectly. For heavy duty applications (over 750 bhp) we ceramic coat the piston crowns and oil retention coat the skirts.

Cheers

Gary

Is the $900 quote just for the nitriding ? or all the machining ? ( bore, hone, crank grind etc )

anyone had their crank nitrated? The shop rang me and asked if i wanted it done since the whole bottom end is getting blueprinted. Cost me $900 though! I want a tough realiable engine and am cutting no corners using argo rods, jun oil pump and ati balancer. Ive been told the block is weaker then rb26's. What can i do to strengthen it? Resin fill? Can someone shed some more light on this?

cheers

Hi Gary

When you say " we machine oil squirters into the conrods " are you referring to what is used in the OEM rod. A oil feed hole in the rod that sprays up under the crown fed from the big end ?

Bitch of a job, not all blocks will accept the threads and you can't tell until you start machining. S1, S2, Commodore, Skyline and turbo blocks, makes no difference, about 1 in 10 will take squirters. So we stopped fitting them about 60 RB30's ago, we machine oil squirters into the conrods, works perfectly. For heavy duty applications (over 750 bhp) we ceramic coat the piston crowns and oil retention coat the skirts.

Cheers

Gary

Could someone explain the process of nitrating for me? If all rb cranks come like that standard then why the heck they suggested it? Since the rb30 crank is fairly old, could it do with a re-doing? I was quoted 900 for nitrate alone and 2100 for bore, hone, grind etc.

I also got my pistons ceramic coated. far easiler then trying to get oil squiters i was told.

guys this is probably the best posting i have seen on anything technical..

anyway im about to start a build on my 31 with a 25/30 and wanna make 300 kw atw...

can someone do me a huge favor as i get confused with trying to follow the posts and give me a guide on parts to use... i have a series2 rb30 in my car so the bottom end is started but wat else do i need to achieve this without it melting down on me...

cheers...

Could someone explain the process of nitrating for me? If all rb cranks come like that standard then why the heck they suggested it? Since the rb30 crank is fairly old, could it do with a re-doing? I was quoted 900 for nitrate alone and 2100 for bore, hone, grind etc.

I also got my pistons ceramic coated. far easiler then trying to get oil squiters i was told.

Damn that sounds really expensive!

Hope they are not taking advantage of your ignorance :D

Does anyone know if you can use the High energy 7L sump and still retain the factory stone guard in a 32 GTST?

Also noticed that the drain plug is on the opposite side to factory.

http://www.skylinesaustralia.com/forums/in...t&id=140593

You can order the sump to gave the drain plug on the other side.

I made a custom order for mine to have two "-10" fittings for the oil returns (one on each side), one oil temp sensor fitting and something else i have forgotten. The mods were done perfectly and placed in the idea places.

guys this is probably the best posting i have seen on anything technical..

anyway im about to start a build on my 31 with a 25/30 and wanna make 300 kw atw...

can someone do me a huge favor as i get confused with trying to follow the posts and give me a guide on parts to use... i have a series2 rb30 in my car so the bottom end is started but wat else do i need to achieve this without it melting down on me...

cheers...

first page there is a pdf you can download. covers allot of things.

Hoang, they are absolutely ripping you off mate.

Nitriding is a process of introducing elements through heat and proximity to create a different alloy near the surface of steels in order to prevent crack propagation and sub surface crack nucleation. It can never wear our as it is now alloyed in the structure. Redoing it is basically useless as the nitriding resists further nitriding. To remove it you need to machine away the surface material.

My bottom end machining, cleaning ready to assemble and head skim with full zero balance cost $1400.

gt35, low mount cast manifold, external gate... possible? don't think so but i like to dream. keep them cops eyes at bay.

If you were running a GTR head then the old HKS manifold for the T04R means that would woudl likely be able to do this dependant on the turbo flange as the hKS manifold is a T4.

Not sure about R34's, but on the 33's the hks manifold and GT30R or GT35R will hit the engine mounts.

Matt had problems because of the turbo size is bigger then the T04E that the kit normally runs. Its strange because the turbo he runs (3076) will fit on an R32 with RB20 (Legend01) and has been used on several RB30s. So the extrea deck height of the block will most likely get you ouf of troubel with clashes with engine mounts

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...