Jump to content
SAU Community

Recommended Posts

Sorry to re-ask a question that has doubtless been asked before (Search turned up nothing, however) but:

If, for example I set the cam gears to +4 degrees inelt & -2 degrees exhaust does this mean the timing needs to go to 16 degrees BTDC on the crank.

Can anyone with these adjustable gears on a stock RB26 (+ pods + exhaust + 1 bar boost) confirm these number to be about right?

I had this all figured out once, but old age & infirmary makes me forget. :kiss:

Link to comment
https://www.sau.com.au/forums/topic/156588-rb26-cam-gears/
Share on other sites

from memory my inlet is advanced maybe 6 and exhaust retarded about 4. gave a nice lumpy idle, and heaps more power everywhere. I don't think you need to do anything to correct the timing. you just adjust the cam timing at the gear and leave everything else alone. it's been nearly 2 years since mine were done though, so if somone else has a better memory than me, listen to them!

Link to comment
https://www.sau.com.au/forums/topic/156588-rb26-cam-gears/#findComment-2910263
Share on other sites

yeah sorry, since you remove the cas to do it I assumed you will re-set it when re-fitted. but you still want the ign timing to be 20 base, so that doesn't change. unless someone can tell me I'm wrong! 2 years is a long time for my poor memory!

Link to comment
https://www.sau.com.au/forums/topic/156588-rb26-cam-gears/#findComment-2910907
Share on other sites

Yeah you need to reset the timing after you change the ex cam position, even if you put the cas back in the exact same spot it will be wrong because you have shifted the cam. Set at 20 base.

Thanks Femno & Baron. Put the things in on the weekend. Adjusted the CAS so the timing light was indicating the same as the PFC handset.

Results? Well nothing much discernable from the data logger. Problem being that turbo motors are greatly influend by ambient air temps & I can't log these. Subjectively it felt much better through 4000rpm and seemed to spool up a little quicker. So I am happy with the results.

Link to comment
https://www.sau.com.au/forums/topic/156588-rb26-cam-gears/#findComment-2915894
Share on other sites

ok, found the graph. I overstated a bit. it was 26kw gain. and absolutely nothing else touched except for the cam gears. the ebc settings, and power FC settings were left alone. at one point there was even more top end, but not as fat in the midrange. i preffered more in the mid range so I stayed with the result you see below.

dyno_graph_-_247vs221p.JPG

Link to comment
https://www.sau.com.au/forums/topic/156588-rb26-cam-gears/#findComment-2915986
Share on other sites

yeah it was a good result. that was 2 years ago, car is a bit different now and with about 20rwkw more. my idle was definately affected. but I love it. sounds much tougher now. :D poor mans cam change I tells ya.

Link to comment
https://www.sau.com.au/forums/topic/156588-rb26-cam-gears/#findComment-2916025
Share on other sites

  • 10 months later...

Timing wont change as the inert part of the gera stays in the same position in relation to the crank.. only the outer advances or retards.

Beware too as i have used a few of the cheap ones lately and found them to be timed way out IE 0degrees is actually closer to 8 (cant remmember if it was adv or ret) so if you getting cheapies then check the cam timing first.

I first found it on AROSPEED Sr20 gears where they needed to be advanced about 9-10 just to get lost power back.....

Link to comment
https://www.sau.com.au/forums/topic/156588-rb26-cam-gears/#findComment-3570370
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...