Jump to content
SAU Community

Recommended Posts

there are ones that move across the windscreen from side to side, they usually do the trick :)

nah, doesn't really matter IMO, theres all this fancy testing done on windscreen wipers, but it comes down to preference

ive seen the silicon ones work as well as kmart/supercheap/auto1 ones

Just bought some dual blade replacements from supercheap the other week... awesome... The last ones I used were genuine Nissan from my brother and the dualies are heaps better. They aren't massive things either so they don't look ugly.

Why have one when two is twice the fun!?!

Dude have you tried them?

What I was trying to say is Ive used the BigW ones, only to find that 2 weeks later they get noisey and dont wipe as nice. I made this mistake a few times trying different blade types.

The Nissan ones I have now have wiped the same way when I bought them 6 months ago.

I buy the cheap ones and complain loudly every ime i use them and realise i forgot to change them 3/6/9/12 months ago!

lol my friend got gyped by the pakaging of this $20 wiper "high silicon content" it's clear look like those silicon glue....he put it on, squeaked like mad...laughing my arse off

I think it's really a dried up moulded silicon glue

the best are still bosch spineless oems. The ones that european cars like merc, bmw, volvo, etc, use these days. You know... the flexi kind that has no backbone. Those are wonderful.. but expensive. And you need to modify your assembly to get it to fit. And i love Rain X. I haven't stopped using it since i started years ago.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...