Jump to content
SAU Community

Recommended Posts

there are ones that move across the windscreen from side to side, they usually do the trick :)

nah, doesn't really matter IMO, theres all this fancy testing done on windscreen wipers, but it comes down to preference

ive seen the silicon ones work as well as kmart/supercheap/auto1 ones

Just bought some dual blade replacements from supercheap the other week... awesome... The last ones I used were genuine Nissan from my brother and the dualies are heaps better. They aren't massive things either so they don't look ugly.

Why have one when two is twice the fun!?!

Dude have you tried them?

What I was trying to say is Ive used the BigW ones, only to find that 2 weeks later they get noisey and dont wipe as nice. I made this mistake a few times trying different blade types.

The Nissan ones I have now have wiped the same way when I bought them 6 months ago.

I buy the cheap ones and complain loudly every ime i use them and realise i forgot to change them 3/6/9/12 months ago!

lol my friend got gyped by the pakaging of this $20 wiper "high silicon content" it's clear look like those silicon glue....he put it on, squeaked like mad...laughing my arse off

I think it's really a dried up moulded silicon glue

the best are still bosch spineless oems. The ones that european cars like merc, bmw, volvo, etc, use these days. You know... the flexi kind that has no backbone. Those are wonderful.. but expensive. And you need to modify your assembly to get it to fit. And i love Rain X. I haven't stopped using it since i started years ago.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
×
×
  • Create New...