Jump to content
SAU Community

Recommended Posts

thought it would be good to hear what dodgy stuff ppl have done to there cars...

i have on previous cars cut springs... used speaker wire to wire up stuff (driving lights/guages)......used gaffa tape on rust and painted over it (old Bomb)

  • Replies 133
  • Created
  • Last Reply

Top Posters In This Topic

I ran into a street sign in my Hyundai and held the left head light, front bumper and left front quarter panel on with cable ties, then proceeded to sell the car in this condition for $7,000. Actually felt bad about this for a while :X

Dodgy things I've done to my car?? what about the dodgy things it doing to me?? - Lately I turn up the volume on my stereo - and the airconditioning fan comes on WTF!

But in the past .....

I've heald part of my wing together with racing tape. I've cabled tied my intercooler on. Actually most mods were held on my previous car with cable ties or racing tape.

lol where do i start!!

got race tape holding my front bar together cause its scraps on every bump n has cracked it, used electicl tape around my radiator pipe cause theres a hole, so many other things but cant tell

Dodgy things I've done to my car?? what about the dodgy things it doing to me?? - Lately I turn up the volume on my stereo - and the airconditioning fan comes on WTF!

But in the past .....

I've heald part of my wing together with racing tape. I've cabled tied my intercooler on. Actually most mods were held on my previous car with cable ties or racing tape.

haha yeh sometimes my windscreen wipers like to go on themselves and dont like to be turned off. have looked like a complete tool a times driving around in 30deg+ days with my wipers going nuts..

The fuel pump broke on one of the work trucks at my dads farm , so rather than walk home we found a lamb bottle these types of bottles have really long hoses to put into the lambs guts when they wont drink , this hose went into the carbretter drained abit of fuel than used gravity as the fuel pump by holding the bottle out the drivers window

I knew this fellow a few years ago to fix rust on his 4x4 he just cut it out then riveted a new piece of metal over it, a cop goes to him one night

(cop) "u can`t do that"

(bogan) "why not they do it on aeroplanes"

- Used a length of rope to remount cooler... for 5 days

- Duct taped the drivers side of the front bar after a tussle with a gutter

- Used double sided tape to mount number plates

- Cable tied pod together

- Drove around with four completely different tyres for a month

... and probably more

Painted a mates old Mazda 323 banana yellow, with housepaint, it was a good idea after drinking a lot one summer. Didn't bother masking much of it up and did the edges of anything that needed to be clear with a paintbrush... it looked dodgy then, got even worse when it got new shoes which where some huge 16" knobby rally tyres and alloy rims (they got painted yellow too) and about a 2" lift with patented MK guard flaring with a 10lb sledge as a dolly and a big f-ck off rubber mallet.

Then it was proper dodgy.

was on the way back from qld and when i got to coffs one of the rocker clips that hold the rocker into place the bolt stripped off and the only thing i could do was wrap electrical tape around the bolt and screw it back it.

It lasted months lol

cable ties are the way of life in the car scene

haha!

cable tie pod to keep it stable,

cable tie the front side & rear kit on cause i didnt have any screws,nuts or bolts..

tied the bonnet down with a piece of string coz latch was fooked lol

a friend of mine had an old hilux (paddock basher) the passenger door swung open while driving and it snapped off of the body wear the hinges are attached, due to rust!..... we welded the thing on and it lasted another couple of years!

i have seen front bars that have cracked and had heaps of cable ties put in it to hold it together.

a few cars back i had a heap of hcips on the front bar and i was going to sell it so i got a can of touchup paint and just sprayed over the top of it without rubbing it back... or cleaning the bugs off. looked great afterwards.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...