Jump to content
SAU Community

Recommended Posts

The A048's are the worst for heat cycles. If they are going to be used for regular track work as well they only have a good 10 or so heat cycles before they really harden up. This fact makes them probably a longer lasting street tyre however. I've used one set and won't use them again.

The Dunlops seem to be the best but are $$$ which is why I use the RE55's which are pretty awesome at everything. The Toyo's have amazing grip from cold compared to the others but not as much grip when hot.

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

The A048's are the worst for heat cycles. If they are going to be used for regular track work as well they only have a good 10 or so heat cycles before they really harden up. This fact makes them probably a longer lasting street tyre however. I've used one set and won't use them again.

The Dunlops seem to be the best but are $$$ which is why I use the RE55's which are pretty awesome at everything. The Toyo's have amazing grip from cold compared to the others but not as much grip when hot.

One other point people may like to note is that the RE55's (Bridgies) make an absolute bucket load of noise on the road. The Toyo's (RA1's & perhaps the 888's) are, by contrast, civilised.

Yeah the road noise really gets to me at 6am drives to Winton :D .

I wouldn't use it on a daily driver, especially before the tyres warm up, the grip is worse than my street tyres.

Edit: Im using RE55s.

Edited by Yawn

every tyre 'heat cycles' I think what you actually want to know is does a tyres performance drop off after a number of heat cycles and the answer is yes, all semi-slicks are affected by the number heat cylcles they are put through. some worse than others, but they all are in some way.

A048's are the worst for performance drop offs after heat cycles. They really do go rock hard.

The Toyo R888's are excelent for road noise compared to the others. I'd use these if the car was seeing more street time than anything or if the motorosport I was doing was primarily auto-tests / hill climbs.

But for a track day tyre I'd use the DZ03's if I could afford them. But I can't so I use the RE55's as they are the next best.

A048's are the worst for performance drop offs after heat cycles. They really do go rock hard.

The Toyo R888's are excelent for road noise compared to the others. I'd use these if the car was seeing more street time than anything or if the motorosport I was doing was primarily auto-tests / hill climbs.

But for a track day tyre I'd use the DZ03's if I could afford them. But I can't so I use the RE55's as they are the next best.

Do you remember which compound of A048 you used, Snowman?

was it Medium (M) or Medium-Hard (MH)?

yeah. i used to use the ute ones. we have a large stack of them all with abot 1.5-2mm left on them. generally this amount lasts about 2 weeks of normal driving up and down the m2 before they are completly smoth.

pretty scary but. not bad in the rain. but at 300+ a tyre its just not worth it. thats what the spare rims with propper track rubber is for :down:

gordon should have been happy then, thats 3 categories in nsw using them as control tyres. Shame they suck - utes used to run on basically a road tyre compound so its not wonder they are going better now - but the dunlop dz03 and bridgestone re55 are still at least a second quicker.

Haven't tried the toyos myself but they are getting a good wrap atm.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...