Jump to content
SAU Community

Recommended Posts

The A048's are the worst for heat cycles. If they are going to be used for regular track work as well they only have a good 10 or so heat cycles before they really harden up. This fact makes them probably a longer lasting street tyre however. I've used one set and won't use them again.

The Dunlops seem to be the best but are $$$ which is why I use the RE55's which are pretty awesome at everything. The Toyo's have amazing grip from cold compared to the others but not as much grip when hot.

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

The A048's are the worst for heat cycles. If they are going to be used for regular track work as well they only have a good 10 or so heat cycles before they really harden up. This fact makes them probably a longer lasting street tyre however. I've used one set and won't use them again.

The Dunlops seem to be the best but are $$$ which is why I use the RE55's which are pretty awesome at everything. The Toyo's have amazing grip from cold compared to the others but not as much grip when hot.

One other point people may like to note is that the RE55's (Bridgies) make an absolute bucket load of noise on the road. The Toyo's (RA1's & perhaps the 888's) are, by contrast, civilised.

Yeah the road noise really gets to me at 6am drives to Winton :D .

I wouldn't use it on a daily driver, especially before the tyres warm up, the grip is worse than my street tyres.

Edit: Im using RE55s.

Edited by Yawn

every tyre 'heat cycles' I think what you actually want to know is does a tyres performance drop off after a number of heat cycles and the answer is yes, all semi-slicks are affected by the number heat cylcles they are put through. some worse than others, but they all are in some way.

A048's are the worst for performance drop offs after heat cycles. They really do go rock hard.

The Toyo R888's are excelent for road noise compared to the others. I'd use these if the car was seeing more street time than anything or if the motorosport I was doing was primarily auto-tests / hill climbs.

But for a track day tyre I'd use the DZ03's if I could afford them. But I can't so I use the RE55's as they are the next best.

A048's are the worst for performance drop offs after heat cycles. They really do go rock hard.

The Toyo R888's are excelent for road noise compared to the others. I'd use these if the car was seeing more street time than anything or if the motorosport I was doing was primarily auto-tests / hill climbs.

But for a track day tyre I'd use the DZ03's if I could afford them. But I can't so I use the RE55's as they are the next best.

Do you remember which compound of A048 you used, Snowman?

was it Medium (M) or Medium-Hard (MH)?

yeah. i used to use the ute ones. we have a large stack of them all with abot 1.5-2mm left on them. generally this amount lasts about 2 weeks of normal driving up and down the m2 before they are completly smoth.

pretty scary but. not bad in the rain. but at 300+ a tyre its just not worth it. thats what the spare rims with propper track rubber is for :down:

gordon should have been happy then, thats 3 categories in nsw using them as control tyres. Shame they suck - utes used to run on basically a road tyre compound so its not wonder they are going better now - but the dunlop dz03 and bridgestone re55 are still at least a second quicker.

Haven't tried the toyos myself but they are getting a good wrap atm.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...