Jump to content
SAU Community

Recommended Posts

The A048's are the worst for heat cycles. If they are going to be used for regular track work as well they only have a good 10 or so heat cycles before they really harden up. This fact makes them probably a longer lasting street tyre however. I've used one set and won't use them again.

The Dunlops seem to be the best but are $$$ which is why I use the RE55's which are pretty awesome at everything. The Toyo's have amazing grip from cold compared to the others but not as much grip when hot.

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

The A048's are the worst for heat cycles. If they are going to be used for regular track work as well they only have a good 10 or so heat cycles before they really harden up. This fact makes them probably a longer lasting street tyre however. I've used one set and won't use them again.

The Dunlops seem to be the best but are $$$ which is why I use the RE55's which are pretty awesome at everything. The Toyo's have amazing grip from cold compared to the others but not as much grip when hot.

One other point people may like to note is that the RE55's (Bridgies) make an absolute bucket load of noise on the road. The Toyo's (RA1's & perhaps the 888's) are, by contrast, civilised.

Yeah the road noise really gets to me at 6am drives to Winton :D .

I wouldn't use it on a daily driver, especially before the tyres warm up, the grip is worse than my street tyres.

Edit: Im using RE55s.

Edited by Yawn

every tyre 'heat cycles' I think what you actually want to know is does a tyres performance drop off after a number of heat cycles and the answer is yes, all semi-slicks are affected by the number heat cylcles they are put through. some worse than others, but they all are in some way.

A048's are the worst for performance drop offs after heat cycles. They really do go rock hard.

The Toyo R888's are excelent for road noise compared to the others. I'd use these if the car was seeing more street time than anything or if the motorosport I was doing was primarily auto-tests / hill climbs.

But for a track day tyre I'd use the DZ03's if I could afford them. But I can't so I use the RE55's as they are the next best.

A048's are the worst for performance drop offs after heat cycles. They really do go rock hard.

The Toyo R888's are excelent for road noise compared to the others. I'd use these if the car was seeing more street time than anything or if the motorosport I was doing was primarily auto-tests / hill climbs.

But for a track day tyre I'd use the DZ03's if I could afford them. But I can't so I use the RE55's as they are the next best.

Do you remember which compound of A048 you used, Snowman?

was it Medium (M) or Medium-Hard (MH)?

yeah. i used to use the ute ones. we have a large stack of them all with abot 1.5-2mm left on them. generally this amount lasts about 2 weeks of normal driving up and down the m2 before they are completly smoth.

pretty scary but. not bad in the rain. but at 300+ a tyre its just not worth it. thats what the spare rims with propper track rubber is for :down:

gordon should have been happy then, thats 3 categories in nsw using them as control tyres. Shame they suck - utes used to run on basically a road tyre compound so its not wonder they are going better now - but the dunlop dz03 and bridgestone re55 are still at least a second quicker.

Haven't tried the toyos myself but they are getting a good wrap atm.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...