Jump to content
SAU Community

Recommended Posts

Ouch... Were you ok?

Are you going to re-shell?

yeah i was fine, very lucky. thank god i had a do-luck rear floor brace as that took most of the impact and didn't allow that section of the car to be push in so much.

Not sure if im going to re-shell or sell up and buy a GTR :) however next car will be 100% Track only, not making the same mistake twice track car = street car = major headaches and too much money

Edited by Kaido_RR
My Rally Car.

Its the 2nd car ive built for the Amsag southern cross rally series. Its a 1993 S13 Silvia with SR20DET.

I am actually disappointed im not going to Southern Mountains anymore this year. AMSAG events look like alot of fun.

Would love to know a bit more about this car, IE how you go for suspension travel etc

My team mate wants to upgrade to an EVO but I think something like this would be more fun and cheaper.

How does the s13 go on dirt?

Well compared to my 120y its unreal, but you would want to hope so lol

I am actually disappointed im not going to Southern Mountains anymore this year. AMSAG events look like alot of fun.

Would love to know a bit more about this car, IE how you go for suspension travel etc

My team mate wants to upgrade to an EVO but I think something like this would be more fun and cheaper.

They are, the class of events and the competition lately have been extremely good.

The Silvia is only a new project i finished building in April. Its done 2 events the Amsag Cowra shire rally and the Orange rally last weekend. Its still in the testing period really but has already proven itself with a couple of very competitive stage times.

Suspension travel seems fine i am actually talking to Murray Coote at the moment as to what we can do with the car because of the last event being its first proper gravel rally with big gutters and jumps the suspension i had died after the first stage. We did suspect this would happen as it was only tein superstreets with my own springs i had made and really was just a guess to get us started. Brakes i have also not upgraded as yet but already have some R32 items waiting to go on. Car is making 320hp at the rears so power is not a problem in fact its on the verge off too mutch as its hard to stop wheel spin.

Its looking to be a great little car and a lot of people are interestred in it already i suspect there will be a few more being made up sooner rather than later.

Here are a couple of in car vids from its very first event it was suffering over boost at this one so no full throttle but was still fun to drive this was fixed by a nice 38mm external gate.

They are certainly a cheaper opiton to an evo or subaru, the little SR20 so far seems a great little engine it has a nice big intercooler and a oil cooler and temps are staying within a safe level.

The car copped an absolute pounding at the last one and apart from a few big dents in the sump guard and a cracked front bar everything else seems perfect which i was pretty suprised with.

about 3 or 4 years ago I was doing a track day at oran park GP circuit there was an older gentleman there with a S13 SR20 silvia that was set-up for dirt rally. It was very standard engine wise just running boost up, ecu and exhaust. he had spent all his money on the rest of the car. had proper long travel dirt suspension (was either DMS or MCA, can't remember), had proper cage, terratrip, coms etc inside and apart from that used khumo semi's (may have been slicks). anyway I went for a few passenger laps with the guy and it was actually one of the fastest cars on the day amongst some pretty good machinery. he said it was great on dirt too. he was running around a 1:18 lap time at oran GP which was bloody fast 4 years ago especially for a silvia that would have been putting out 150rwkw max. the guy was a good steerer though too.

lovely guy, I wish I could remember his name, but he was competing with that silvia in NSW state dirt rally stuff.

Yeh keeps me smiling for sure.

BB, i can't say i have seen that one but i know of a couple around the suspension is def important in these things like all circuit/rally cars, so im looking forward to getting something decent for it.

Hi Jason,

How is Jamie and the boys down at waterhouse Auto care? I haven't dropped in to see him in ages! I must stop by with a jimmy and cola one day and catch up.

S13 looks like it has the goods mate, and Jamie has heaps of experience with both 120Y's and rallying, which I'm guessing is where you met him? Is Rae still driving his 120 or has he been back in the series?

Good luck out there mate and remember,

Stay sidewayz Kidz,

Dan.

Hi Jason,

How is Jamie and the boys down at waterhouse Auto care? I haven't dropped in to see him in ages! I must stop by with a jimmy and cola one day and catch up.

S13 looks like it has the goods mate, and Jamie has heaps of experience with both 120Y's and rallying, which I'm guessing is where you met him? Is Rae still driving his 120 or has he been back in the series?

Good luck out there mate and remember,

Stay sidewayz Kidz,

Dan.

Hey mate

Yeh i met him a few years ago with the 120y he helped me out with a few good ideas on what to do with it.

He has been a great help with the S13, Also with the tuning side of things and gave me a hand building the engine and Eddie does all the exhaust work for it.

He is doing well busy as always but always looks after me, i have seen your avatar picture on the wall there come to think of it

He isnt using the 120y much at the moment, though he did 1 event earlier this year Rae has prolly used it more than him lately lol, but more recently she has been co-driving for Ashby in an older S12 Silvia.

Thought I'd throw a few pics up of my race car....R32 GTS-t

I've been doing all the local sprints and hill climbs for the last few years including some gravel stuff and just recreantly did the car up to rally specs and raced it in my first tarmac rally which was mt stuart sprint in Townsville nrth qld. The last pic is what happens when you back it in to mt stuart at pace....I think luck was on my side....

post-25231-1277855791_thumb.jpg

post-25231-1277855864_thumb.jpg

post-25231-1277855931_thumb.jpg

post-25231-1277855975_thumb.jpg

post-25231-1277856043_thumb.jpg

post-25231-1277856215_thumb.jpg

nice GTST. I have to say that navigators foot rest is a work of art! can I ask who made that or where did you get it from? it's almost too good to rest a shoe on....almost. ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...