Jump to content
SAU Community

Recommended Posts

We need to start a thread about common problems so we are aware of them when they arise.

Does any one know of any common problems with these vehicles?? E.G. TRANSMISSION, ENGINE, A/C, ELECTRONICS ......

I Don't know if you guys have had the problem, but i have read forums in the U.S. where oil consumption with some g35 and mostly 6mt, seems to be a real issue. Infinity if pushed, has replaced engines.

Does anyone know for sure if the g35 is made in Japan or the U.S. because i was told this was a U.S. problem?

What do u do if the key fails?? how do u get in the car?

Oh and has anyone found a workshop maunal online?

If I am correctly thinking of the manual you are talking about, there is one on www.g35drive.com. http://g35driver.com/forums/showthread.php?t=107032.

awesome thanks mate... also when u pulled ur ket apart was there a metal piece floating around freely... i couldnt for the life of me work out where it was supposed to go so i left it out my key has double the range it used too...

My drivers side power window switch is starting to work only when it wants...

You will need to replace your window electric motor available from Nissan @ approx $350

I've had to replace both now

They also seem to have issues with clicking rear wheels

awesome thanks mate... also when u pulled ur ket apart was there a metal piece floating around freely... i couldnt for the life of me work out where it was supposed to go so i left it out my key has double the range it used too...

Welcome.

lol, nah, I didn't have anything like that. But hey, as long as it works, and it seems it works even better now, haha. My range isn't very long, so wouldn't mind the double...

You will need to replace your window electric motor available from Nissan @ approx $350

I've had to replace both now

They also seem to have issues with clicking rear wheels

What you mean clicking rear wheels? What is the actual problem?

You will need to replace your window electric motor available from Nissan @ approx $350

I've had to replace both now

They also seem to have issues with clicking rear wheels

I am having problems again with my central locking and power window both on the driver's side. The auto electrician who knows the V35 repacked the power window motor and aligned the gears and it worked for a while but has now shit itself again.

Any clues why both have gone - do they use the same controller? Are the motors for both the same as the 350Z?

The window is locked in the up position and it interfers with the top moulding when closed because the release memory for the window to open and close the door is also not operating. Any clues as to what's happening??

I am having problems again with my central locking and power window both on the driver's side. The auto electrician who knows the V35 repacked the power window motor and aligned the gears and it worked for a while but has now shit itself again.

Any clues why both have gone - do they use the same controller? Are the motors for both the same as the 350Z?

The window is locked in the up position and it interfers with the top moulding when closed because the release memory for the window to open and close the door is also not operating. Any clues as to what's happening??

Unfortunately seems to be quite a common problem. A few of the 350z guys have reconditioned the power window motor but also didn't last long so they just go out and buy new motors. Best price I've seen is $500 for both passanger and drivers side. Not sure why it would interfere with the central locking though.

What you mean clicking rear wheels? What is the actual problem?

Here ya go Dave

http://www.infinitihelp.com/Ownership/Bull...5/ITB05-002.htm

Main page for any other problems

http://www.infinitihelp.com/Ownership/Infi...35/Diagnose.htm

Cheers

Chris

  • 1 month later...

I've been searching for info on V35's to replace my ageing POS 1994 Maxima.

Window failure in a Nissan again! I thought they fixed this problem, how the hell do they manage to replicate it again? :P

The window motors in the Maxima have been replaced by an auto elec, after Nissan charged me $200 just to look at the car. All up has cost me $500+ and they still don't work!

The back rear window is chocked up with wood, which is very stylish.

The front windows would not come back up so I reversed the polarity and used the door entry keypad to wind them back up then disconnect the power all together.

Basically I don't need to deal with this f**king bullshit again in another Nissan.

Anyone actually had someone fix the windows in the V35 and have them stay fixed before I even think about buying a V35?

Is the same problem in R33/34s or just the V35?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...