Jump to content
SAU Community

Common Problems With The Coupe

T88turbo
 Share

Recommended Posts

superspit Mentor

superspit

Posted
Posted
Has anyone notice when first starting up, most times for me, and when the initial rev occurs a rattle type sound?? (hope that is a good description!)

Also as mosoto stated about when in idle there is a slight rattling occuring, you can here this on the outside on the drivers side?? (sounds like a flywheel type sound I suppose)

First start up?..yes..same here...no issue with that, as it happens so rarely, and certainly doesn't mean impending doom. (I've also heard it on other V35's)....oh, I think it's more of a bumpety bump, minus the lower frequencies.

That farking 'idle' rattle/ticking??....I got a new gearbox..(for lots of other reasons).....all good now....I believe that particular noise has to do more with the crazy/ over engineered flywheel the 35's have......inspect/look at a stock one if you ever get the chance....way too much going on with that design.!!

  • Replies 136
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

nicko370
nicko370

Yeah who knew?  Mot me. But the mechanic at Tokyo Prestige was straight onto it. Whipped the wheel off, smeared a small amount of grease on the mounting surface, reassembled with wheel nuts done nice

T88turbo
T88turbo

INFINITI'S ARE ASSEMBLED IN THE USA, BUT THE PARTS ARE MADE IN JAPAN. YANKS DON'T KNOW HOW TO BUILD CARS FOR SHIT, THE JAPANESE ARE ONE OF THE BEST IN THE WORLD.

Posted Images

siglapian Explorer

siglapian

Posted
Posted

Yeah yeah I think I know what you are talking about!...

A very slight rattling noise that is over in less than 2 seconds? Sounds like something from the gearbox.

Only occasionally comes out during the first movement of the day, even though I warm up my car before moving off....

mosoto Proficient

mosoto

Posted
Posted
Only occasionally comes out during the first movement of the day

That's called a fart............... :closedeyes:

but seriously as spit said, it's more a knocking than a rattle. Sounds like the tappet noise you get in an old holden. It has been attrributed to the flywheel on Gdriver forums as well which makes sense given mine does not go away, hot or cold.

  • 3 weeks later...
Pulp Veteran

Pulp

Posted
Posted (edited)

Ok!!

Tonight disarmed my car, got in, and due to force of habit I pushed the drivers side lock latch so that both doors would lock, and I noticed that the passenger side latch did not move! pressing the central locking button made no difference. If I manually push the latch it feels as if it is not catching (if it is suppose to) and the door will lock, if I then either unlock with the drivers side latch or central locking button the passenger side latch will unlock fine, just not with my side latch or locking button.

Anyone seen this before? is it something I can look at myself by removing the door trim?

(Also freakishly the BOSE CD player was just going through all the CDs as if they weren't in there!! but now seems ok! :))

Edited by Pulp
BLISTC Experienced

BLISTC

Posted
Posted

my problems......

1. my bose cd player is goneskies. wont read any cds. solution? i got chris to put an ipod cable so now i can listen to ipod. this will tie me over for 1 yr or so until i decide to get an aftermarket stereo system. its not a priority right now, as i think the stock BOSE system does an ok job.

2. The paint is weak as anything. These cars scratch very easily! i have a few scratches here and there which i will get taken care of when i get my bodykit put on, i might go and respray the whole car at the same time.

3. The leather on my drivers side seat, where it meets the plastic on the right hand side near the lever to make the seat lean forward so people can get in the back.......... it has started to crack. I plan to retrim the seats too so i really dont care, want to get some better leather trim put in the car.

4. Rear Axel Click - this started happening on my car but i took the TSB to pro concept in west ryde and Joshua there fixed it for me. no more rear click!

Thats all my problems i have had so far

Chris Rogers Grand Master

Chris Rogers

Posted
Posted
Ok!!

Tonight disarmed my car, got in, and due to force of habit I pushed the drivers side lock latch so that both doors would lock, and I noticed that the passenger side latch did not move! pressing the central locking button made no difference. If I manually push the latch it feels as if it is not catching (if it is suppose to) and the door will lock, if I then either unlock with the drivers side latch or central locking button the passenger side latch will unlock fine, just not with my side latch or locking button.

Anyone seen this before? is it something I can look at myself by removing the door trim?

(Also freakishly the BOSE CD player was just going through all the CDs as if they weren't in there!! but now seems ok! :P )

actuator time. I have a few on order if you need one.

MILLOS Community Regular

MILLOS

Posted
Posted

I've had the same problem with my driver's side door not locking automatically.

When Chris comes down to Melbourne again in August to install my alarm, he will fix that for me too, it's a little expensive to get it all replaced, but will need to be done!!!

Pulp Veteran

Pulp

Posted
Posted
actuator time. I have a few on order if you need one.

It started working all day today! :)

I really hope it doesn't keep happening cause I can't afford to spend anymore $$ for a while!

Also if I really had to I'd probably use my extended warranty to do so. I wonder if they will still cover it if I say I can get the part?? hmm!

crumbly Rookie

crumbly

Posted
Posted (edited)

has anyone had any issues with the auto motor on the drivers seat not working when you flip the seat? otherwise the seat works.

just looking at a car at the moment and I know I need passengers window motor and possibly the central locking is gone if its no the remote/key battery.

Edited by crumbly

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      WGNC34 - floor mats

      By GTSBoy · Posted

      I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • MBS206
      R34 Skyline climate control unit transistor

      By MBS206 · Posted

      Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Murray_Calavera
      Tein Circuit Master- rebuild worth it?

      By Murray_Calavera · Posted

      Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • Duncan
      NC MX5

      By Duncan · Posted

      I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Duncan
      WGNC34 - floor mats

      By Duncan · Posted

      Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...