Jump to content
SAU Community

Recommended Posts

i have bought a turbosmart type2 veeport bov and installed it on my skyline.

now my car keeps stalling and ive followed the instruction and tightened the spring but it still stalls,we have checked over it and theres no leaks,no blockages and no collapsed or twisted hose.

i got the spring as tight as it could go and it still stalled so i ended up taking it off and put the factory part back on and it runs perfect and doesnt stall and now i have wasted $400 on the adapter and bov.

im confused to why it stalls,hope yous can help me out.

The car is overfuelling due to the ATMO BOV.

The car expects the re-circ BOV to be there, its tuned for it.

Hence when you put it back it works fine.

So you have two choices.

Get a ECU & tune it ($1500)

Or go back to the stock one... which is is how Nissan intended it to be :D

Nothing wrong with the stock BOV so not really sure why you would want to change it anyhow.

The car is overfuelling due to the ATMO BOV.

The car expects the re-circ BOV to be there, its tuned for it.

Hence when you put it back it works fine.

So you have two choices.

Get a ECU & tune it ($1500)

Or go back to the stock one... which is is how Nissan intended it to be :D

Nothing wrong with the stock BOV so not really sure why you would want to change it anyhow.

thanks for the info.

im having the same problem with my turbosmart BOV but i have set it up so its set to recirc and its still stalling i have no idea whats goin on with it and im looking at being in the same boat as blitz becuz im gunna have to put the stocker back on or get an aftermarket ecu and tune (better start saving lol)

installing a HKS Fuel Cut Defender should override this problem? i think.

i experienced the same with my Blitz. I didnt mind the stalling every now and then, but i removed it to avoid the boys in blue.

The stock one does its job well enough!

as previously mentioned.. maybe investigate if you can adapt that BOV back to a plumb back .

also vac leaks can be quite hard to track down .. make sure you look for cracks at the places where other pipes join the inlet ( if there are any )

to be honest I was really impressed by the stock recirc valve on the rb25det NEO .. looked very well made! and at least if you have a recirc BOV the boys in blue have got one less thing to bend you over for !

and if you have a pod you should still hear the BOV noise.

ive heard alot of specualtion, but how much boost can a standard r32 gtst bov handle?

has anyone had a problem running 17-18 psi thru one?

im ready to put my stocka back on and see if it helps with the stalling..

ive heard alot of specualtion, but how much boost can a standard r32 gtst bov handle?

has anyone had a problem running 17-18 psi thru one?

im ready to put my stocka back on and see if it helps with the stalling..

From what I've read on SAU, the standard 32 gtst bov can handle about 14psi before it starts to leak if I remember correctly. If you want to run the standard plumb back system, I think you can just get the GTR's bov and put it in its place. They handle up to about 20-ish psi.

Feel free to correct me.

Its wierd mine has worked fine on the car and it has never stalled. Might change it back just cos it gets annoying sometimes. Did you make sure you used the gasket between the bov and the intake pipe?

  • 8 months later...
  • 16 years later...

My tuner told me this as well that the reason the car will stall is because it has a AFM system, he said it I want to do it properly I need to delete that system, he said I can try it though to see how it goes. My BOV recirculates btw (can hear flutter sometimes though), how do s15's and stuff not stall and they also have the AFM system? I was considering blocking it off for ovbious reasons but was hesistant because of the above.

1 minute ago, GTSBoy said:

By changing to a Halaltech and not having an AFM, typically. Or, they stall or otherwise carry on.

A lot of them are driven by p platers with stock ecu's lol. When does the stalling usually happen is it high speeds?

Edited by silviaz
On 10/31/2024 at 10:12 AM, silviaz said:

My tuner told me this as well that the reason the car will stall is because it has a AFM system, he said it I want to do it properly I need to delete that system, he said I can try it though to see how it goes. My BOV recirculates btw (can hear flutter sometimes though), how do s15's and stuff not stall and they also have the AFM system? I was considering blocking it off for ovbious reasons but was hesistant because of the above.

If you block off the BOV entirely you will get reversion out of the MAF and get a lean spike instead of a rich spike as the MAF double-counts the airflow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...