Jump to content
SAU Community

Recommended Posts

seems alot of ppl are having dramas with these manifolds, i put mine on about year and half ago... took few days, didnt even use new gaskets and never even got it shaved. hasnt leaked and still going strong lol

even came with every bolt i needed to bolt it all on + vacum fittings.

keep at it should all work out in the end.

  • 3 weeks later...

Hi Zebra , any chance of a pic of where the bleed valve is . I'm interested to know if a mount could be fabbed to fit the knock off manifold to mount the bleed valve conveniently .

I was looking at one on an R33 yesterday and I'm also interested to see if the plenum inlet could be flange modified to take the std TB and so leave room for the std washer tank .

Cheers A .

Edited by discopotato03
Anyone else done the install without blocking up the pipe coming out of the thermostat housing?

Look two pages back :)

http://www.skylinesaustralia.com/forums/in...t&p=4333536

Edited by WilYawn
Hi Zebra , any chance of a pic of where the bleed valve is . I'm interested to know if a mount could be fabbed to fit the knock off manifold to mount the bleed valve conveniently .

I was looking at one on an R33 yesterday and I'm also interested to see if the plenum inlet could be flange modified to take the std TB and so leave room for the std washer tank .

Cheers A .

there are adapaters you can buy for about $90 to bolt on the factory TB.

also if you run a 90 degree silicon bend of the TB and down thru your usual intercooler hole. you can retain your washer bottle..

its all so very simple.

if you look around for the greddy instructions in pdf, you will see they remove absolutely everything water hose wise and run a hose from the nipple at the back on the heater hose to the nipple at the front near the thermostat

pretty easy

  • 3 weeks later...

I bought a greddy style plenum KIT from vulture motorsport. Cost me $565 deliviered. It also came with a throttle body adapter and all the other shit you need to do this. Was a prick of a job. Im not a mechanic but like to do my own work so I had a crack at it. I Was pretty much stumped with it half on until I found this thread. Awesome write up :P

I run a 90 deg silicone bend straight off the throttle body. I had to cut the existing hole a bit more to make it work. Got a new lenth of straight intercooler pipe and had a vaccum nipple for something on the Power fc and the AAC line fitting welded in. Because the washer bottle now didnt fit I took it to the plastice welders. They chopped the bottle in half, right beside the internal pumps and sealed it back up. It half the capacity of stock now but at least it isn't a defect and you still have enough water to wash the windescreen.

The tosser who owned my car before me cut up the stock plenum and put the throttle body to the front greddy wank style. It hurt tuning and I have NFI why it was done. Ill put up some before and after shots....

post-65433-1250164183_thumb.jpg

post-65433-1250164216_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...