Jump to content
SAU Community

Recommended Posts

Ok, heres a chance to let out some automotive frustration!

I am doing a bit of a project for uni and looking at some bad design in transport, particularily in cars.

Just wanted some feedback as to any bad design you guys have come accross within any type of car or its function. For example a switch functioning in a wiered way compared to what you percieve it should do when you first go to use it... basically something which doesnt work or do what it should do.

One instance I came accross is on some Eurpean cars, where reverse is on the top left, you have to firstly, push the stick forward (this, when you are trying to drive backwards in reverse) as well as lift up on the gear knob, otherwise it wont go into the reverse gear (without there being any visual indication to do so).

Any other examples or input would be grealty appreciated!

Link to comment
https://www.sau.com.au/forums/topic/184824-bad-design-in-cars/
Share on other sites

  • Replies 104
  • Created
  • Last Reply

Top Posters In This Topic

Auto gear boxes which, when used in manual mode have the upshift & downshift function upside down. Most boxes you have to press forward to change up & pull back to change down. This is backwards & counter intuitive. One fo the few companies to get it right is Ford.

Indicator stalk on the left hand side of the steering wheel in a right hand drive car is a long time bug bear.

Interlocks which make you put your foot on the brake to change between drive & reverse.

The r33 ariel going all the way up whenever the stereo is on...

the massive blind spot in mum's camry....

single point injection

the 3 speed auto in my old vk... I mean WTF!

idrive

gigantic bus like steering wheels in sports cars

standard auto boxes that change all over the place when you dont want or need it

power figures at the flywheel

paddle shift, and tiptronic. If i want manual, i want MAN-U-AL!

the auto clutch in some old vw beetles

90's american sports cars.

digital speedo's

that should get you started :closedeyes:

anything made by daewoo, ssang yong... etc lol

cars with wiper stalks and indicators swapped around...i know its european, but we are in oz ffs.

oil filters that are sometimes near impossible to get to

theres more, but i cant think of any atm

the newer cars are, the less thought has gone into the ease of replacing parts. even basic servicing is getting retarded..

oh and the drainage channel behind the front guards on most nissans.. just traps moisture and rusts.

+1 The r33 ariel going all the way up whenever the stereo is on...

I mean why put in a swtich for hte user to decide if it was to go up.. im usually playing a cd an that dont need no aerial... pet pieve

f**king paddle shifts, so damn retarded.....like it was mentioned above....If I want manual, I had better see the H pattern and a clutch

Another silly deisgn would be the 90s BMW which I drove once.....the handbrake was very very awkward

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
    • Mine is all -12, I’m running a dry sump in a billet block though 
×
×
  • Create New...