Jump to content
SAU Community

Recommended Posts

Just installed my new nismo super coppermix clutch, and its got a very light pedal feel to it(i bought a nismo large slave), but its really on/off, i mean once its disengages, it just catches and goes, and i have to be several meters away from the car infront to make sure i dont hit it, its good for launching, but traffic is a bitc*, does this sound normal???, and anyway to make the clutch feel more progressive?

Just installed my new nismo super coppermix clutch, and its got a very light pedal feel to it(i bought a nismo large slave), but its really on/off, i mean once its disengages, it just catches and goes, and i have to be several meters away from the car infront to make sure i dont hit it, its good for launching, but traffic is a bitc*, does this sound normal???, and anyway to make the clutch feel more progressive?

normal as far as I know....mine is the same..u get used to it.

in the same boat....from stock clutch to twin plate....but doesnt take too long to get used to.....but its pretty embarasing stalling a gtr...

A friend of mine with a Nismo twin plate of some kind says all Skyline drivers should stall at least once every time they drive the car.

Man up people!

My OS twin is very aggressive, but I expected it to be. I just give it two quick blips before I take off to ensure enough revs with the lightened flywheel and off ya go. Interesting up hill in the wet, but apart from that it's all good :P

A friend of mine with a Nismo twin plate of some kind says all Skyline drivers should stall at least once every time they drive the car.

Lol. i used to have an OS twin plate and was quite pleased with myself if i made it somewhere without stalling. I was a happy boy when i went back to a single purely as i wasn't worried i was going to stall every time i pulled away. I think i've stalled less in the last year than i did in my best week with the twin plate.

Interesting..

I drove a mates OS twin and found the pedal lighter than my single and had a more progressive/smoother take up. Yes the take up was super quick and was easy to stall but I found it easier to drive than my at the time new 9puk Xtreme XHD.

As the 9puk got to half its life it was almost like a normal organic clutch in its feel where as the OS is still nice tight and grippy.

i actually went from a TS2A to a 9 puck XHD extreme :) After the twin plate the single was a joy to drive and was about the same weight as stock. Still doesn't slip on me and still nice to drive

I went from stock to HD organic then to XHD 9puk.

The XHD felt 2x the weight of the HD and the HD was basically the same as stock.

I'm very keen to see how this GTR exedy pressure plate stacks up as I believe its up around 1500kg vs the 1180kg of the XHD I bought back in late 04.

I went from stock to an os giken twin plate and stalled straight away. I got so used to it an loved it after a while.

Now i have a JIm Berry clutch of some sort and it's a single plate. I hate it after about 4 days of driving it. It's too light, it's too easy(sounds good but it ain't) to drive and i hate not having a lightened flywheel now. I feel like i'm driving my sisters charade. I have a feeling i'll be going back to a twin plate soon.

I'm looking at buying an ORC 709D.. what do you mean by menace?

well some people have it and reckon it's easy to drive. they reckon mine isn't installed correctly...

it's actually really light, but has a hair trigger - on or off.

it's only done about 1,000kms, so might get better with some time.

it can be slipped, but I don't get 'used' to it as it get driven about once or twice a month :)

you might like it...

Just installed my new nismo super coppermix clutch, and its got a very light pedal feel to it(i bought a nismo large slave), but its really on/off, i mean once its disengages, it just catches and goes, and i have to be several meters away from the car infront to make sure i dont hit it, its good for launching, but traffic is a bitc*, does this sound normal???, and anyway to make the clutch feel more progressive?

You will need at least 1000k's to break it in....

Then you will need to drive hard every time you see it playing up.

Most of us who use these clutches..whether it be Jim Berry or Nismo drive around in traffic

Once in a while you need to give them a hard time so they come good again.

In your case it is new...take it easy till you bed in your flywheel.

I have a Jim Berry one and I have problems with it when it is cold...bites quick like the way you are saying.

The worst problem is when I drive a standard car for a while then jump into mine...always end up stalling it

on take off the first two times.... :) ...but can't help it..the foot just comes up..not expecting that force.

lol good to see everyone has the same issues.

You only stall it cos you dont wanna look like a tool reving the car too hard, then u look like a tool for stalling it...but you get used ot it and then its fine.

Peak Hour is a bitch...I only drive it on the w/e anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.  
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...