Jump to content
SAU Community

Recommended Posts

have some nice Rays gt2s for sale that woul be sick on the silvia... :)

My front suspension arms arrived today, so should have everythig fitted and the car on the ground this week-end. was hoping to have the engine assembled and fitted but have had an issue with valve spring retainers, so unless a replacement set arrives 2morro, the engine will probably go in next week.

nice. they were a good buy. I was nearly going to grab them as a spare set for the silvia. then remembered I already have 3 sets of rims for the silvia.... :banana:
Edited by BezerkR32
  • Replies 812
  • Created
  • Last Reply

Top Posters In This Topic

... and additional front diff support bracket.

Charles do you mean the one that goes under the nose of the diff? If so, ditch it. Only the 32gtr ran this extra bracket, 33 and 34 don't use it, and neither do some big power cars I know of with theis cradle. You just need some large washers to protect the lower bush

Picked up heads after sorting out the valve train issue which ended up being a dodgy set of locks. Got a new set of Manley locks and all was sweet.

ARP head stud kit, MLS Felpro head gaskets, Comp Cam anti pump-up roller lifters, Comp Cam pushrods & Yella Terra rockers. I know that the pushrods may be a bit foreign to some people. lol. Also fitted stainless ARP exhaust manifold stud kit, as they were cheaper than GM.

Comp ended up at 10.9:1 after the deck machine, which is excellent as standard is 10:1

Will finish setting up the rocker pre-load and sit the engine in tomorro.

post-20078-1226395704_thumb.jpg

post-20078-1226395777_thumb.jpg

post-20078-1226395864_thumb.jpg

post-20078-1226395949_thumb.jpg

post-20078-1226396046_thumb.jpg

post-20078-1226396124_thumb.jpg

post-20078-1226396178_thumb.jpg

Picked up heads after sorting out the valve train issue which ended up being a dodgy set of locks. Got a new set of Manley locks and all was sweet.

ARP head stud kit, MLS Felpro head gaskets, Comp Cam anti pump-up roller lifters, Comp Cam pushrods & Yella Terra rockers. I know that the pushrods may be a bit foreign to some people. lol. Also fitted stainless ARP exhaust manifold stud kit, as they were cheaper than GM.

Comp ended up at 10.9:1 after the deck machine, which is excellent as standard is 10:1

Will finish setting up the rocker pre-load and sit the engine in tomorro.

Looking nice!

I hope you didn't mount the heads the way you are about to in the bottom left picture... It shows your about to mount the head in the wrong direction... (Exhaust port to the intake side...) :domokun:

yeh, was going to try something different, but it wouldnt fit lol. you dont miss much. :(

Looking nice!

I hope you didn't mount the heads the way you are about to in the bottom left picture... It shows your about to mount the head in the wrong direction... (Exhaust port to the intake side...) ;)

some hot rod guys told me there was 10kw in doing it.

Starting to bang it all together, all going sweet, i guess thats the advantage in triall fitting everything first.

ill finish fitting radiator, and dummy up engine harness so electrician can start. can also start buying bends for the exhaust

Should get a mechanic to do it, Stu.

:)

post-20078-1226479364_thumb.jpg

post-20078-1226479521_thumb.jpg

post-20078-1226479614_thumb.jpg

post-20078-1226479695_thumb.jpg

post-20078-1226479772_thumb.jpg

post-20078-1226479879_thumb.jpg

post-20078-1226480084_thumb.jpg

post-20078-1226480170_thumb.jpg

post-20078-1226480255_thumb.jpg

post-20078-1226480336_thumb.jpg

they are off our Commodore. They are 1&3/4" primary pipes into 3". they had to be modified to fit but only slightly.

Nice!

Not long now until you can start it...

From witch car does the headers come from? Pontiac GTO?

And what are the spec on the headers?

thanks Phunky, still a while off though. hoping to have it all done for powercruise, that will give me the oportunity to run everything in and sort out any teething problems before i track it.

Looking good! Can't wait to see this thing in action

BezerkR32, amen to ya brother, forget the haters lol, mine makes 340hp on a completely stock engine with a link g4 ecu, ive owned many an rb20det and a couple work rb25dets and I have to say I enjoy my new setup the most by far. I did manage to retain my power steering though, although its so incredibly tight as you can see from the pictures, that it initially wore a hole in the starter motor:S I have the car running now, just havent updated the thread. Cant wait to see some action footage lol.

Video

http://www.bebo.com/FlashBox.jsp?FlashBoxId=8060454510

Build Thread

http://southernskylines.com/phpBB3/viewtop...f=24&t=2359

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...