Jump to content
SAU Community

Recommended Posts

  • Replies 812
  • Created
  • Last Reply

Top Posters In This Topic

f**k this thing is loud on the inside.

don't know how happy stu was with it....but I was lucky enough to do some laps in the passenger seat and:

a. it goes like stink

b. handles pretty good and

c. stu seems to handle a steering wheel pretty good.

the dino-line is a unusual setup but its working damn well.

thanks mate, made a small error with uncle Duncan in the car like missing turn 1 but other than that the car was much better behaved. was much more confident under braking.

have some light throttle tuning to sort out and a gearbox selector issue but other than that very happy.

car held its own in a staight line against a few cars boasting 70kwatw more, but the weight factor would have a lot to do with it. wet weather sessions were interesting.....but car was solid once it dried out.

f**k this thing is loud on the inside.

don't know how happy stu was with it....but I was lucky enough to do some laps in the passenger seat and:

a. it goes like stink

b. handles pretty good and

c. stu seems to handle a steering wheel pretty good.

the dino-line is a unusual setup but its working damn well.

  • 2 weeks later...

Some good Superlap type cars in the new issue of Zoom Magazine, boys and girls. Tilton Interiors Evo, a psycho red Supra (SUPRAT) and some great photography from the event.

There's also a full feature on the Roger Clark Motorsport (RCM) Gobstopper WRX and Stu's awesome LS1 R32.

Enjoy :-)

29cwc28.jpg

I knew there was a build thread around here somewhere and i've only just found it now.

Seeing this animal in the metal idling at a standing still and running on the track is a sight to behold. It's something that you just can't visualise mentally because it has to be seen in person.

Some shots I snapped of it running at Oran Park at the SAUNSW track day. :)

_F4U8528.jpg

_F4U7492.jpg

_F4U8084.jpg

_F4U8257.jpg

cant run any forced induction over 3000cc engine capacity in sports sedan and maximum of 6000cc aspirated.

ill stroke this engine when i freshen it up which hopefully wont be in the near future. car is a handful now with 300kw, cant imagine another 100kw.

currently in the process of getting car log-booked, just finishing off a few little odds and ends like remote battery isolator cable and sealing rear parcel tray. Getting inspected this week-end.

Thanks for the great words and pictures Xmetal. love the shot at the back of the track....

ls1 is an import. 5.0L V8 was holdens last V8 motor castine block.

if u knew something about those motors u can strap a snail on and get easy 400rwkw with stock internals..no shit motor!

Car all log-booked and have sent away for my L2S liscence.

Looking forward to show-n-shine in december, as i dont think ill get it out for a meeting before the end of the year. Discovered the tach-recall button and got a shock to see highest recorded rpm, probably shouldnt do that too often.

post-20078-1257797007_thumb.jpg

  • 2 months later...

reverse gear repaired and gearbox back in the car, looking forward to next track day which will probably be at wakie and then powercruise.

weighed car and it went 1193kg which is a little heavier than i thought but still lite enough.

reverse gear repaired and gearbox back in the car, looking forward to next track day which will probably be at wakie and then powercruise.

weighed car and it went 1193kg which is a little heavier than i thought but still lite enough.

Good on you man you should be proud of yourself for trying this . i have a porsche carrera 2 with an LS1 in it, with great help from others , the LS1 motor is lighter than the stock 6 with turbos and generates more power . Good luck
Good on you man you should be proud of yourself for trying this . i have a porsche carrera 2 with an LS1 in it, with great help from others , the LS1 motor is lighter than the stock 6 with turbos and generates more power . Good luck

Do show, where is your build thread?

  • 2 months later...

hey guys, long time since any updates. Running the car on Anzac day to finish tune on the track to tidy up some light throttle issues. Also trying some new wheel alignment specs. Hope to see some of you there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
×
×
  • Create New...