Jump to content
SAU Community

Recommended Posts

Found this on OzHonda; (http://www.ozhonda.com/forum/showthread.php?t=76263)

you have a Telstra network phone you can track where your car is for 55 cents per location check.

It is called "Whereis everyone". To set up it sends an SMS to the other phone. If they agree to the tracking you can continue to see where the other phone is on a sensis map for 55 cents. It is surprisingly accurate! Try it yourself.

I have found it finds others to within a street away - and it shows a pin point on the map where it calculates the phone to be.

I think it is more designed for teenie boppers to find each other when they go nightclubbing but it is also a very cheap car tracking option!

How? Put an old mobile phone in your car with a cheap $5 plan etc - (leave it on all the time) and if the car is stolen you can find your car! (well its approximate location - but like I said it narrows it down to within a street or two on a map). Sometimes better - it finds my house to about 50 metres.

Not as good as sat nav tracking devices but it is better than nothing and ghetto cheap!

The phone you are using to view the maps obviously needs to be good enough to access mobile internet but the phone you are tracking can be old school 10 years old - it doesn't matter at the tracked end.

Just be warned - if you do see your car outside some crook's house - go to the police - don't confront the thief yourself..

http://whereismobile.com.au/

http://whereismobile.com/features.php

and a video;

http://www.locatrix.com/pages/posts/wherei...australia11.php

Link to comment
https://www.sau.com.au/forums/topic/188469-tracking-car-with-phone/
Share on other sites

that and get a little sticker like the intel one that says satellite tracking inside :) I know it detracts from the look of the car etc but having that installed wont stop a thief but having that installed and a sticker to say the car is tracked might deter the thief in the first place.

  • 2 months later...

Two very interesting DIY projects that show promise...

a) http://forums.performanceforums.com/forums...t-67142833.html

PIC16F876 connected to a 5110, and a GPS

b) http://cgi.ebay.com.au/YOU-CAN-BUILD-YOUR-...1QQcmdZViewItem

Search for "real time GPS tracking system" if link is down and look for the "digital download" result.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...