Jump to content
SAU Community

Recommended Posts

Found this on OzHonda; (http://www.ozhonda.com/forum/showthread.php?t=76263)

you have a Telstra network phone you can track where your car is for 55 cents per location check.

It is called "Whereis everyone". To set up it sends an SMS to the other phone. If they agree to the tracking you can continue to see where the other phone is on a sensis map for 55 cents. It is surprisingly accurate! Try it yourself.

I have found it finds others to within a street away - and it shows a pin point on the map where it calculates the phone to be.

I think it is more designed for teenie boppers to find each other when they go nightclubbing but it is also a very cheap car tracking option!

How? Put an old mobile phone in your car with a cheap $5 plan etc - (leave it on all the time) and if the car is stolen you can find your car! (well its approximate location - but like I said it narrows it down to within a street or two on a map). Sometimes better - it finds my house to about 50 metres.

Not as good as sat nav tracking devices but it is better than nothing and ghetto cheap!

The phone you are using to view the maps obviously needs to be good enough to access mobile internet but the phone you are tracking can be old school 10 years old - it doesn't matter at the tracked end.

Just be warned - if you do see your car outside some crook's house - go to the police - don't confront the thief yourself..

http://whereismobile.com.au/

http://whereismobile.com/features.php

and a video;

http://www.locatrix.com/pages/posts/wherei...australia11.php

Link to comment
https://www.sau.com.au/forums/topic/188469-tracking-car-with-phone/
Share on other sites

that and get a little sticker like the intel one that says satellite tracking inside :) I know it detracts from the look of the car etc but having that installed wont stop a thief but having that installed and a sticker to say the car is tracked might deter the thief in the first place.

  • 2 months later...

Two very interesting DIY projects that show promise...

a) http://forums.performanceforums.com/forums...t-67142833.html

PIC16F876 connected to a 5110, and a GPS

b) http://cgi.ebay.com.au/YOU-CAN-BUILD-YOUR-...1QQcmdZViewItem

Search for "real time GPS tracking system" if link is down and look for the "digital download" result.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My apologies. I forgot we were talking about weird beard M series stuff. Had been talking elsewhere with someone about an R33 with similar subject and got confused.
    • Nope, I don't like the look of ND RF, or any ND really, I don't like their faces or arses, why, because of their "modern" lines, the NC, whilst "modernish" has a more rounded shape that I like Well, that's how my overly judgemental eyes see it anyway  
    • Should be more than fine, especially the overall fuel pressure would never exceed 3.5bar (assuming that thing never gets more than 0.5bar of boost in stock form). According to the chart, it's 11amps.
    • I definitely know the first rule here, look first, ask second. I've seen many people get roasted 😂 I found a few diagrams for the RB, but I'm yet to come across one for the VQ. From what I have read, the pump gets the +12v along with the FPCM, and it's the negative wire that gets passed through the resistor to regulate the voltage. So I assume I can just ground the negative wire at the pump to eliminate the FPCM control. But I really wanted to see the VQ circuit diagram first to make sure I understood it correctly. Once the new pump is in I'll do some testing to see how it behaves, and in the meantime, I'll keep looking for a wiring diagram. Thanks for your help mate, your time is greatly appreciated.    
    • Maybe? I have the Supercheap ToolPro low thingo. It has a somewhat smaller diameter lifting "bowl" than you would expect on a workshop grade trolley jack, and a split rubber pad to suit that diameter. It clears the "N1" style skirts I have. Probably wouldn't if the jack's bowl and a suitably larger rubber block were in use. Having said that though.....you only need the rubber block to exist on the inner side of the pinchweld, so could carve away any rubber that fouled the skirt, leaving some there for "insurance" </simples>
×
×
  • Create New...