Jump to content
SAU Community

Recommended Posts

  • Replies 72
  • Created
  • Last Reply

Top Posters In This Topic

Pretty sure they're not direct injection - which is a bit of a dumber and not just for emissions control. Anybody know what type of engine management ie spreed density or twin AFM's? Has nissan given up on EMS and just relegated bosch to do there engine control? Aslo are there two 02 sensor on each bank ie before and after catalytic converter? One way fuel system?? Surely there is moe info out there.

i don't know why they don't just run the outlet from the turbo through a single divided long intercooler core and into the opposite bank of cylinders instead

they guys making it had friends in tuning shops and aftermarket intercooler factories and wanted to leave them with some work! :ninja:

Same as porsche turbo

it's not like they could put a long divided intercooler in the back of the 911 bumper bar, with the exhaust and lack of airflow and whatnot

I was thinking that too, you'd think there would be a little less pressure drop

all those bends look like a massive flow restriction

they guys making it had friends in tuning shops and aftermarket intercooler factories and wanted to leave them with some work! :)

shifty work on the part of HKS, Top Secret and Signal, eh? lol

  • 3 weeks later...

back on topic, I think people are confusing the R35 GTR with the Skyline GTR's.

It's not a skyline. It's not a daily driver that's had a magic wand waved over it. It's a (relatively) cheap supercar. It's designed to be a collectors piece from day one. Handmade engines, new technology, advanced driver aids, this isn't a car for the street, it's a car you either tune for racing, or a bauble you brag to your other banker/ footballer friends about owning.

Maybe in five years time, things may change. They may make a more mass produced model, resulting in more cost effectiveness. To be honest, I can't see much profit coming directly from the R35. The price point seems too low for the amount of labour, research, development etc. that went into it, so it seems like it's a hero car, an example of what they can do, more than an attempt at making a supercar for the common man.

due to the low volume, I don't expect it to drop dramatically in price like the skylines. I also don't imagine that there'll be the same amount of aftermarket support, unless the volume of cars produced is upped.

To be fair though, if the R35 lives up to hype, Nissan would be stupid not to capture that reputation and make a new skyline based on that technology, possibly a stagea too. Simplify it a bit, mass produce everything and THEN you'd have a car that tuners would love. (cheaper too)

It's really comparable to the supercar range. The only real mods that supercars get done to them are paint, wheels, interior and LCD screens everywhere.

I can't see it being cost effective to ship an engine to Australia in less than 5 years, and that's being optimistic. Though, if I'm wrong, and somehow the engines magically become cheaper and more plentiful, I'd love to see one in an R32, of course I would. But as long as the onyl way you can get it is to buy the whole car, why would you?

Forget the GTR engine, I'd like to see the 7.0 V8 from the Z06 running a twin turbo or big single setup in a r32-r34 GT-R.

If it could be adapted to the ATESSA-ETS system, that would be a killer combination!

Close???

Type in 'gt autosound/dls r34 skyline' into www.google.com.au and you will see it. Would post a link but work blocks most of the sites its on. Saw it in Adelaide, it looks pretty nice and makes huge power. Its a drifter, this is proof that people have too much money and/ or are insane.

Edited by harvesteros
  • 11 months later...
Forget the GTR engine, I'd like to see the 7.0 V8 from the Z06 running a twin turbo or big single setup in a r32-r34 GT-R.

If it could be adapted to the ATESSA-ETS system, that would be a killer combination!

now your talking!! BULK TORQUE!!

like they say anythings possible with deep enough pockets

back on topic, I think people are confusing the R35 GTR with the Skyline GTR's.

It's not a skyline. It's not a daily driver that's had a magic wand waved over it. It's a (relatively) cheap supercar. It's designed to be a collectors piece from day one. Handmade engines, new technology, advanced driver aids, this isn't a car for the street, it's a car you either tune for racing, or a bauble you brag to your other banker/ footballer friends about owning.

Maybe in five years time, things may change. They may make a more mass produced model, resulting in more cost effectiveness. To be honest, I can't see much profit coming directly from the R35. The price point seems too low for the amount of labour, research, development etc. that went into it, so it seems like it's a hero car, an example of what they can do, more than an attempt at making a supercar for the common man.

due to the low volume, I don't expect it to drop dramatically in price like the skylines. I also don't imagine that there'll be the same amount of aftermarket support, unless the volume of cars produced is upped.

To be fair though, if the R35 lives up to hype, Nissan would be stupid not to capture that reputation and make a new skyline based on that technology, possibly a stagea too. Simplify it a bit, mass produce everything and THEN you'd have a car that tuners would love. (cheaper too)

It's really comparable to the supercar range. The only real mods that supercars get done to them are paint, wheels, interior and LCD screens everywhere.

I can't see it being cost effective to ship an engine to Australia in less than 5 years, and that's being optimistic. Though, if I'm wrong, and somehow the engines magically become cheaper and more plentiful, I'd love to see one in an R32, of course I would. But as long as the onyl way you can get it is to buy the whole car, why would you?

I fully understand your point, but another view may be this: R32 GT-R = Group A racecar, made in numbers to meet homologation requirements. Hardly a daily driver with a magic wand over it, perhaps? Thoughts, anyone?

That said, the 35 is a very, VERY sexy piece of kit. It just doesn't have the racing soul.

From experience over the past few months i can tell you that a brand new Porsche 997 Turbo crate engine from the mother land is gonna cost you $155,000, since the GTR is suppose to be a turbo for half the price, would it be wrong to assume that you would be paying 50-70ish grand for a new crate engine for the GTR?

I fully understand your point, but another view may be this: R32 GT-R = Group A racecar, made in numbers to meet homologation requirements. Hardly a daily driver with a magic wand over it, perhaps? Thoughts, anyone?

That said, the 35 is a very, VERY sexy piece of kit. It just doesn't have the racing soul.

i dunno how much more racing soul you want other than a bespoke design supercar that's designed from the ground up to give the shaft to other supercars. all that compared to a homologation model of a family sedan (C10 GTR thru to R34 GTR)... I'd go as far as saying it had more racing intent than its predecessors.

Its like saying the Falcon has more racing soul than a Ford GT cos it competes in V8 Superbarges.

i dunno how much more racing soul you want other than a bespoke design supercar that's designed from the ground up to give the shaft to other supercars. all that compared to a homologation model of a family sedan (C10 GTR thru to R34 GTR)... I'd go as far as saying it had more racing intent than its predecessors.

Its like saying the Falcon has more racing soul than a Ford GT cos it competes in V8 Superbarges.

Was the 35 designed as a race car first and foremost, and a road car secondly? I've missed something...

Was the 35 designed as a race car first and foremost, and a road car secondly? I've missed something...

NONE of the GTRs were.

PC10 came out before the KPGC10 GTR, R32 GTS came out before the R32 GTR, etc etc. The R32 GTR's design for example was finalised AFTER the R32 GTS had left prototype stage and was about to be produced.

they all took an existing platform and made a race sedan out of it.

The R35's the first GTR that's not based on a sedan... which is why they dropped the Skyline moniker. It was designed to be the stallion in Nissan's stable from the get go. Besides, there's a world of difference between a gutted out rattley stiff suspensioned billion fuel pumps buzzing slick wearing race car and a road going sports car.

there's a world of difference between a gutted out rattley stiff suspensioned billion fuel pumps buzzing slick wearing race car and a road going sports car.

LOL; couldn't agree more! I would much rather the 35 to a highly modded earlier GT-R of any model for road duties, and I'd still pick it over any 'real world' supercar. I can't see any way, even with all the money imaginable, that a Veyron or a Pagani etc would be any more 'liveable', either...although a full carbonfibre Zonda is pretty sexy! So the 35 is still the king dingaling of road cars.

I s'pose I was thinking of the R32's race history, how many races it won that it entered everywhere blah blah blah; I'm assuming the 35 will get raced more and more, but in a different world now where it probably can't match the history only because of rules, regs, events and so on. I think the new car will have a good crack at things, if allowed!

Back on topic; a 'crate' 35 engine would be lost in any other car, regardless of cost, IMHO. Considering what Nissan invested in getting the balance 'just right' as a whole car, we could almost start a thread here about what a top fueller engine would be like in a Skyline...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
×
×
  • Create New...