Jump to content
SAU Community

Recommended Posts

Welcome blade. I dont know if its changed but my HID on my V35 S2 2005 were disconnected on compliance (2007) & I had to refit them. It had something to do with matching the right Aust standard which wasn't available at that time- I would think it should be ok now. I cant be sure for the Stagea but should be very similar. On the V35 it wasn't that hard to put back- make sure the compliers give you the wiring and the HID fitting or get them to fit after its registered - its perfectly legal to have them- just the compliance

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/49/#findComment-7742088
Share on other sites

Welcome blade. I dont know if its changed but my HID on my V35 S2 2005 were disconnected on compliance (2007) & I had to refit them. It had something to do with matching the right Aust standard which wasn't available at that time- I would think it should be ok now. I cant be sure for the Stagea but should be very similar. On the V35 it wasn't that hard to put back- make sure the compliers give you the wiring and the HID fitting or get them to fit after its registered - its perfectly legal to have them- just the compliance

Yeah it seems that this is still the case. Sadly my compliars were very 2nd rate, I can't get answers nor a reply from them.. So looks like I'll have to spend some hard earned soon and rectify it.. Will have to start looking into getting some genuine replacements, car hopefully is delivered today, so I'll hold off until I have a list on what I need.. Can only assume ballast & globes..

Many thanks

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/49/#findComment-7742705
Share on other sites

The reason the hid's are removed is because they don't meet the ADR standards (toss, toss) for being self levelling and having water spray jets. Silly as it sounds, that is the reason because in Australia we know more than the rest of the world.

You should ask the compliance mob to give you the globes and ballasts removed from your car if they did indeed totally remove them.

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/49/#findComment-7742746
Share on other sites

Blade511- Your compliers should NOT keep anything from your car - ITS YOURS. You should demand and get it back- its nothing short of theft!. I have no idea why anyone would touch ballast other than to steal it (which is usually a big job to remove anyway). Usually the wiring is disconnected from behind the headlights & somewhere in the engine bay/wheel arch, the they just modify a bracket / wire for standard globes!.Noone should be touching your ballasts!. They are about 750new (if you can find one). I know because I had to change one ($220gen 2nd hand one). I was lucky I had a friend comply it and the compliers talked him /me through every detail, they kindly bundled the wiring and bulbs in the Glove box. I was very lucky my car still has the jap warranty card for the impul chip and fujitsubu exhaust, spare key + vallet key. If anyone took anything from my car They would be very very sorry..!. You know the car has it- go there & get it!

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/49/#findComment-7745136
Share on other sites

Blade511- Your compliers should NOT keep anything from your car - ITS YOURS. You should demand and get it back- its nothing short of theft!. I have no idea why anyone would touch ballast other than to steal it (which is usually a big job to remove anyway). Usually the wiring is disconnected from behind the headlights & somewhere in the engine bay/wheel arch, the they just modify a bracket / wire for standard globes!.Noone should be touching your ballasts!. They are about 750new (if you can find one). I know because I had to change one ($220gen 2nd hand one). I was lucky I had a friend comply it and the compliers talked him /me through every detail, they kindly bundled the wiring and bulbs in the Glove box. I was very lucky my car still has the jap warranty card for the impul chip and fujitsubu exhaust, spare key + vallet key. If anyone took anything from my car They would be very very sorry..!. You know the car has it- go there & get it!

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/49/#findComment-7745139
Share on other sites

Blade511- Your compliers should NOT keep anything from your car - ITS YOURS. You should demand and get it back- its nothing short of theft!. I have no idea why anyone would touch ballast other than to steal it (which is usually a big job to remove anyway). Usually the wiring is disconnected from behind the headlights & somewhere in the engine bay/wheel arch, the they just modify a bracket / wire for standard globes!.Noone should be touching your ballasts!. They are about 750new (if you can find one). I know because I had to change one ($220gen 2nd hand one). I was lucky I had a friend comply it and the compliers talked him /me through every detail, they kindly bundled the wiring and bulbs in the Glove box. I was very lucky my car still has the jap warranty card for the impul chip and fujitsubu exhaust, spare key + vallet key. If anyone took anything from my car They would be very very sorry..!. You know the car has it- go there & get it!

Could not agree more.. I've been on one hell of a back and forth and am starting to get results.. But they are painful and am at the point where enough is enough.. Put simply I don't want to deal with them any further. And would be happy to send them a bill just to stir.. However, you and I both know that I'll be wasting my time when it gets down to the nuts and bolts of it.

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/49/#findComment-7745461
Share on other sites

Blade511- Your compliers should NOT keep anything from your car - ITS YOURS. You should demand and get it back- its nothing short of theft!. I have no idea why anyone would touch ballast other than to steal it (which is usually a big job to remove anyway). Usually the wiring is disconnected from behind the headlights & somewhere in the engine bay/wheel arch, the they just modify a bracket / wire for standard globes!.Noone should be touching your ballasts!. They are about 750new (if you can find one). I know because I had to change one ($220gen 2nd hand one). I was lucky I had a friend comply it and the compliers talked him /me through every detail, they kindly bundled the wiring and bulbs in the Glove box. I was very lucky my car still has the jap warranty card for the impul chip and fujitsubu exhaust, spare key + vallet key. If anyone took anything from my car They would be very very sorry..!. You know the car has it- go there & get it!

Could not agree more.. I've been on one hell of a back and forth and am starting to get results.. But they are painful and am at the point where enough is enough.. Put simply I don't want to deal with them any further. And would be happy to send them a bill just to stir.. However, you and I both know that I'll be wasting my time when it gets down to the nuts and bolts of it.

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/49/#findComment-7745462
Share on other sites

Blade511- Your compliers should NOT keep anything from your car - ITS YOURS. You should demand and get it back- its nothing short of theft!. I have no idea why anyone would touch ballast other than to steal it (which is usually a big job to remove anyway). Usually the wiring is disconnected from behind the headlights & somewhere in the engine bay/wheel arch, the they just modify a bracket / wire for standard globes!.Noone should be touching your ballasts!. They are about 750new (if you can find one). I know because I had to change one ($220gen 2nd hand one). I was lucky I had a friend comply it and the compliers talked him /me through every detail, they kindly bundled the wiring and bulbs in the Glove box. I was very lucky my car still has the jap warranty card for the impul chip and fujitsubu exhaust, spare key + vallet key. If anyone took anything from my car They would be very very sorry..!. You know the car has it- go there & get it!

Could not agree more.. I've been on one hell of a back and forth and am starting to get results.. But they are painful and am at the point where enough is enough.. Put simply I don't want to deal with them any further. And would be happy to send them a bill just to stir.. However, you and I both know that I'll be wasting my time when it gets down to the nuts and bolts of it.

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/49/#findComment-7745464
Share on other sites

  • 4 months later...
  • 2 months later...

Hi guys, 

I'm looking to buy a 2008 nissan skyline 370gt v36. It's an import with navigation system and stuff in Japanese. That's fine, but since I have never owned an import car before, I would like to know if spares are readily available in WA? Or in the eastern states? I'm getting an inspection report done as well. Anything I should keep in mind when I go have a second look and drive? Your advice and help will be greatly appreciated. 

Thanks. 

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/49/#findComment-7809295
Share on other sites

  • 1 year later...

Here are some pictures of my latest buy, a 2005 350GT auto.

 

Driving buy the local car yard & spotted it on the lot for $10990NZD. Had a look on the web-site & found out it only had traveled under 50,000k so I decided to go have a look. Took it for a spin, loved it, so I bought it!

Runs on 17s, has black cloth interior, factory tinted windows & no wind deflectors over the doors (which spoils the look).

I got a gadget that plugs into the cig lighter socket to play music from my phone through the factory head unit.

 

The pictures ain't the best but had to take them between heavy rain showers from my phone.

DSC_0111_25.jpg

DSC_0113_25.jpg

DSC_0114_25.jpg

DSC_0115_25.jpg

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/49/#findComment-7881710
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...