Jump to content
SAU Community

Recommended Posts

Hmm turns out i actually don't have fog lights either :D. I thought i did because it said so in my car manual, but i checked recently and it turns out i don't.

Anyway, i think my parking lights are T10's and i have an R33 Series 1?

  • 4 weeks later...
  • 3 weeks later...
wot about R34 xenon headlights... anyone know wot type of bulb they are??

R34 Headlight bulbs are

Parkers: T10

Low Beam: H1

High Beam: GE 9011

Note GE 9011's were discontinued about 18 months ago,they were replaced by Toshiba 9011"s but you can also use any 9005 bulb by filing a bit off one of the tabs.

Both H1 and 9005 bulbs are as cheap as chips on everyone's favourite auction site.about $18.00 a pair including postage

mate can you take a pic of the front bar indicators next time you take em out ..never seen them with fog lights in them on a series 1 before...mine just have a slot for the parkers..wouldnt mind chasing up a set..

Edited by thizzle
  • 2 weeks later...
R34 Headlight bulbs are

Parkers: T10

Low Beam: H1

High Beam: GE 9011

Note GE 9011's were discontinued about 18 months ago,they were replaced by Toshiba 9011"s but you can also use any 9005 bulb by filing a bit off one of the tabs.

Both H1 and 9005 bulbs are as cheap as chips on everyone's favourite auction site.about $18.00 a pair including postage

If you can get a hold of the 9011's use those as they are the brightest halogen bulbs you can get.

A comparison:

http://hirheadlights.com/stats.htm

And some info on 9011's

http://hirheadlights.com/

  • 3 months later...

If anyone is interested im putting together an LED kit for the R33 series 2 (maybe more models if these become popular)

Basically replacing all of the exterior bulbs with LEDs.

Fog lights

Parker lights

Front, side and rear indicators

LED indicator flasher unit (so no more fast flashing indicators)

Reverse lights

As i already have the aftermarket LED tail lights in i wont be getting LEDs for the stop lights. I did however put LED bulbs in when i had the stock tail lights in and they looked crap.

Ill post some pics in a few weeks.

  • 3 months later...
  • 4 months later...
cheers for the help ppls

i moved the washer bottle to the side, and managed to get it out, and back in, using long nose pliers.

here's my contribution to your thread :thumbsup:

the parker bulb type, and holder. R33

post-29392-1198462460_thumb.jpg

hey just asking how did u managed to put the new light in??? I got a series 2 R33 and it is very tough to put it back...did u twist it or something?? mine is a 15mm wedge btw...so its a big bigger

  • 1 month later...

.. And be careful even with 'so-called' white LEDs. My car had DAN-666 'white' LEDs which when I was forced through a Regency defect inspection for my exhaust, they added my 'too blue parkers' to the list of things to the *new* defect list. Awesome.

Yep for the reason shown below, something that is 'less yellow' appears 'more blue' even though it is a spectrally a definate pure white (5000k to be exact) it is 'less yellow'

than a 3000K tungsten bulb.

A good example is to put the white LED next to a BLUE one, it actually appears 'more yellow' but for the clowns at Regency 'perecption is reality'

HunterLab.jpg

Edited by 666DAN
  • 4 weeks later...

Hi, does anyone know if you can upgrade the globes on the Driving lights for an R33 series 2. I see from this thread they appear to be 55W H3's and I know that for the headlights (being plastic) you shouldn't go above the stock 55w bulbs, but does the same apply for thre driving lights? (are these lenses also plastic?)

They are fog lights mate. And are pretty much illegal to use in 90% of driving conditions. Which is why i put an SMD LED cluster bulb in there, so now they are driving lights.

I could argue the point to the police if i get pulled over, i probably wont win seeing how the rest of the car breaks nearly every rule in the book ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...