Jump to content
SAU Community

Recommended Posts

these thought all started by a forum member that had me thinking for a while and i need answers now (bastard)

the first pic is your seen this 1000 times manifold sold in performance shops and ebay.from $200-$800 so far people say there shit.

the second i have not seen many times and am wondering if they would be any good or if any one has one,they look ok to me but maybe to a high quality forum specialist might be able to advise me.

also these 6boost manifold dose any one have proof that they work,i know people say they don't crack but is there proof of gains.ive read posts in the past but after a while still no real answer!!

Quick list of mods,greedy intake manifold,hks gtrs,hks cams,forged pistons&rods,power fc,nismo injectors +++++++ all mods

if anyone can help that would be nice.

first pic ebay copy

second hpi manifold,copy or not i dont know.

post-26570-1199346488_thumb.jpg

post-26570-1199347755_thumb.jpg

post-26570-1199347764_thumb.jpg

post-26570-1199347820_thumb.jpg

Edited by WARLORD
Link to comment
https://www.sau.com.au/forums/topic/200047-manifolds-do-they-dont-they/
Share on other sites

  • Replies 112
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i Bought the first manifold off ebay and it didnt even fit.

Had to drill the holes out bigger for it to fit onto the studs then i finally got it on it would hit the mount tat supports the intake pipe just before the butterfly.

my mate has a vl turbo with the 6boost manifold with a stock internal engine and a t66 turbo. The spool time is almost instant. Its farkin insane

i have met kyle and he has showed me his manifolds and the merge collector on them is awesome. A+ quality and a top dude.

Also Mark from godzilla motorsports that has a r32 gtr, that now i believe runs 8.34 has a 6boost manifold on his car.

If ya looking at a manifold go check out 6boost first.

my mate has a vl turbo with the 6boost manifold with a stock internal engine and a t66 turbo. The spool time is almost instant. Its farkin insane

i have met kyle and he has showed me his manifolds and the merge collector on them is awesome. A+ quality and a top dude.

Also Mark from godzilla motorsports that has a r32 gtr, that now i believe runs 8.34 has a 6boost manifold on his car.

If ya looking at a manifold go check out 6boost first.

thanks for the info does your mate have a before and after ,power wise

the second one is just another version of cheap shit which looks attractive to the untrained eye.

dont be a stingy ass and go out and get yourself a 6-boost or hks gt- cast manifold to complement the reast of

your mods

very good .......sharp eye :down: now where can i find a hks manifold ive looked for a while,and as for a 6boost manifold it would be nice to see how many people really got a good result,and how many of these are being used by sau members .

these thought all started by a forum member that had me thinking for a while and i need answers now (bastard)

the first pic is your seen this 1000 times manifold sold in performance shops and ebay.from $200-$800 so far people say there shit.

the second i have not seen many times and am wondering if they would be any good or if any one has one,they look ok to me but maybe to a high quality forum specialist might be able to advise me.

also these 6boost manifold dose any one have proof that they work,i know people say they don't crack but is there proof of gains.ive read posts in the past but after a while still no real answer!!

Quick list of mods,greedy intake manifold,hks gtrs,hks cams,forged pistons&rods,power fc,nismo injectors +++++++ all mods

if anyone can help that would be nice.

ok the first one is utter shit and gives zero incerease anywhere, the second ones design is killer and is based one the HPI one.... i know i helped to develop them.

the HPI and similar manifolds were originally developed by myself, EVAN and finally built by GIZZMO NZ the prototypes were then sent off to ********* factory to be manufactured..... a month later it was available ex HPI who just happens to use the same supplier.... it has now been copied by at least 4 other factories in taiwan and china.

as for performance there was no drawbacks and a clear increase accross the board (all original testing done with std turbo).... it took four prototypes to get right and many months of work on a dynapack to compare designs.

NO other local manufactured manifold can compete with that (HPI) design for response or power and factory turbo placement so all your normal dumps and front fit without modification..

ok te first one is utter shit and gives zero incerease anywhere, the second one is killer and is based one the HPI one.... i know i helped to develop them.

the HPI and similar manifolds were originally developed by myself, EVAN and finally built by GIZZMO NZ the prototypes were then sent off to ********* factory to be manufactured..... a month later it was available ex HPI who just happens to use the same supplier.... it has now been copied by at least 4 other factories in taiwan and china.

as for performance there was no drawbacks and a clear increase accross the board (all original testing done with std turbo).... it took four prototypes to get right and many months of work on a dynapack to compare designs.

intrested to know how much do you/they sell them for?

a few years back i was reading HPI magazine, they had a article on S/S manifolds and cast iron manifolds.....

does it really make a diffrents? besides how much heat one manifold can take? and weight? :)

in really depends on the application, i prefer on GTR's to leave the factory manifolds and heat shields in place but in sr20 for example anything over 230ish i will turf the manifold in favour of a few proven designs (not the cheap genric crap), up until the rb25 manifold was available i would never consider changing the factory item, even on small high mounts i would make up an adapter to lift turbo and run a gate pipe down for the waste gate as the factory manifold flowed OK'ish and combined with a good heatshield provided good results at a very low cost.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...