Jump to content
SAU Community

Recommended Posts

hey there, i was looking at getting dump pipes for my rb26, they will be coming of garrett 2860's, do all brands fit? has there ever been a test to see which ones give best power? any recomendations would be helpfull......cheers robbie

Link to comment
https://www.sau.com.au/forums/topic/202602-gtr-dump-pipes/
Share on other sites

hey there, i was looking at getting dump pipes for my rb26, they will be coming of garrett 2860's, do all brands fit? has there ever been a test to see which ones give best power? any recomendations would be helpfull......cheers robbie

You can either get the short type eg HKS or the longer versions which Trust make. There are also 100's of knock off version available.

The HKS type replace the existing dump pipes in your car & will tie into whatever exhaust you have. The Trust type tie into the exhaust just before the cat - so you don't need a front pipe. For me if I would buy the Trust gear instead of the HKS dumps AND front pipes. However if you have an exhaust with an aftermarket front pipe (many exhausts use the stock ones) I would just buy the HKS dumps.

The Tomei ones fit the same as the HKS type, but do not segregate the wastegate flow aswell as the HKS units.

Just about everything will fit your turbos.

Hks

See photo

Front pipe

http://www.nengun.com/hks/stainless-front-pipe-gtr

Tomei

http://www.nengun.com/tomei/extention-pipe...san-skyline-gtr

Trust

http://www.nengun.com/trust-greddy/extention-front-pipe

post-5134-1200968387_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/202602-gtr-dump-pipes/#findComment-3595974
Share on other sites

why you changing so soon?

Pretty much because I like spending money on nothing :(

There's absolutely nothing wrong with the HKS dump pipes... They're brilliantly designed and pieces of art. I just want the higher flow capabilities of the Tomei dump pipes.

Link to comment
https://www.sau.com.au/forums/topic/202602-gtr-dump-pipes/#findComment-3596041
Share on other sites

On a similar note guys.. when replacing the dumps you are going to lose the stock heat shields. How important are these and what are you guys doing about it ?

If its necessary, im thinking of wrapping mine in that fabric that keeps the heat in. I know theres ceramic coating as well but sounds expensive? Or are yas putting the stock shields back on by welding ?

Link to comment
https://www.sau.com.au/forums/topic/202602-gtr-dump-pipes/#findComment-3596118
Share on other sites

On a similar note guys.. when replacing the dumps you are going to lose the stock heat shields. How important are these and what are you guys doing about it ?

If its necessary, im thinking of wrapping mine in that fabric that keeps the heat in. I know theres ceramic coating as well but sounds expensive? Or are yas putting the stock shields back on by welding ?

You should wrap them in exhaust wrap if you intend to track the car in my opinion.

That or have them ceramic coated.

Link to comment
https://www.sau.com.au/forums/topic/202602-gtr-dump-pipes/#findComment-3596128
Share on other sites

Correct me if I'm wrong Richard aka BB. I think it was you that once said "you shouldn't wrap your dump pipes cause it can cause cracking and increase metal fatigue by keeping the heat in the dump pipe by wrapping it"?

Is this correct? if so what can be done to keep heat out of the engine bay?

Also does the price of the Tomei dumps justify the performance gain?

The people that have fitted the Tomei dumps notice a "significant change" before and after fitment?

In terms of less spool up time?

cheers

rob

You should wrap them in exhaust wrap if you intend to track the car in my opinion.

That or have them ceramic coated.

Link to comment
https://www.sau.com.au/forums/topic/202602-gtr-dump-pipes/#findComment-3596158
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...