Jump to content
SAU Community

Recommended Posts

hey there, i was looking at getting dump pipes for my rb26, they will be coming of garrett 2860's, do all brands fit? has there ever been a test to see which ones give best power? any recomendations would be helpfull......cheers robbie

Link to comment
https://www.sau.com.au/forums/topic/202602-gtr-dump-pipes/
Share on other sites

hey there, i was looking at getting dump pipes for my rb26, they will be coming of garrett 2860's, do all brands fit? has there ever been a test to see which ones give best power? any recomendations would be helpfull......cheers robbie

You can either get the short type eg HKS or the longer versions which Trust make. There are also 100's of knock off version available.

The HKS type replace the existing dump pipes in your car & will tie into whatever exhaust you have. The Trust type tie into the exhaust just before the cat - so you don't need a front pipe. For me if I would buy the Trust gear instead of the HKS dumps AND front pipes. However if you have an exhaust with an aftermarket front pipe (many exhausts use the stock ones) I would just buy the HKS dumps.

The Tomei ones fit the same as the HKS type, but do not segregate the wastegate flow aswell as the HKS units.

Just about everything will fit your turbos.

Hks

See photo

Front pipe

http://www.nengun.com/hks/stainless-front-pipe-gtr

Tomei

http://www.nengun.com/tomei/extention-pipe...san-skyline-gtr

Trust

http://www.nengun.com/trust-greddy/extention-front-pipe

post-5134-1200968387_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/202602-gtr-dump-pipes/#findComment-3595974
Share on other sites

why you changing so soon?

Pretty much because I like spending money on nothing :(

There's absolutely nothing wrong with the HKS dump pipes... They're brilliantly designed and pieces of art. I just want the higher flow capabilities of the Tomei dump pipes.

Link to comment
https://www.sau.com.au/forums/topic/202602-gtr-dump-pipes/#findComment-3596041
Share on other sites

On a similar note guys.. when replacing the dumps you are going to lose the stock heat shields. How important are these and what are you guys doing about it ?

If its necessary, im thinking of wrapping mine in that fabric that keeps the heat in. I know theres ceramic coating as well but sounds expensive? Or are yas putting the stock shields back on by welding ?

Link to comment
https://www.sau.com.au/forums/topic/202602-gtr-dump-pipes/#findComment-3596118
Share on other sites

On a similar note guys.. when replacing the dumps you are going to lose the stock heat shields. How important are these and what are you guys doing about it ?

If its necessary, im thinking of wrapping mine in that fabric that keeps the heat in. I know theres ceramic coating as well but sounds expensive? Or are yas putting the stock shields back on by welding ?

You should wrap them in exhaust wrap if you intend to track the car in my opinion.

That or have them ceramic coated.

Link to comment
https://www.sau.com.au/forums/topic/202602-gtr-dump-pipes/#findComment-3596128
Share on other sites

Correct me if I'm wrong Richard aka BB. I think it was you that once said "you shouldn't wrap your dump pipes cause it can cause cracking and increase metal fatigue by keeping the heat in the dump pipe by wrapping it"?

Is this correct? if so what can be done to keep heat out of the engine bay?

Also does the price of the Tomei dumps justify the performance gain?

The people that have fitted the Tomei dumps notice a "significant change" before and after fitment?

In terms of less spool up time?

cheers

rob

You should wrap them in exhaust wrap if you intend to track the car in my opinion.

That or have them ceramic coated.

Link to comment
https://www.sau.com.au/forums/topic/202602-gtr-dump-pipes/#findComment-3596158
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can u check this way it works for power supply?
    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
×
×
  • Create New...