Jump to content
SAU Community

Recommended Posts

  • Replies 204
  • Created
  • Last Reply

Top Posters In This Topic

Yeha that beat sonic is for the a/m stereo... not sure what it does however but enough about him

moar about what wire is for the antenna amp power :)

I am trying to remember what I did.

The power for the antena I picked up of the one of the wires at the back, purple keeps ringing a bell.

I ran the power for the tuner from the cigarette lighter.

what the gooligooo goo is this thing.. its in behind the navi unit where i have a jungle of wires

google gives me no love

post-31456-1246496096_thumb.jpg

theres been an aftermarket radio in there at some stage. that is a bose integration piece to get the TV/navi audio back into the aftermarket unit. its a $300 piece!

(I sell them.)

ok all good, everything works ok power wise. but the picture no good.. is on ntsc also.. was on pal as i trialed it in my room before the car

post-31456-1246514266_thumb.jpg

set it on NTSC and it will work. thats a standard thing with those tuners.

  • 1 month later...

Hi guys,

I was unlucky enough to get my Axis without a Nav unit. However I was lucky enough to find a V35 half cut with a system installed that I was able to swap out for $300. I have pretty much everything except the TV antenna's. I have wired the DVD unit to the screen(as I had to cut the loom and have that working minus the TV tuner and CAN(yet to be connected/wired). I would like to connect a carputer running Centrafuse, and TV tuner into the system. Control for the carputer will be via a 6.5 or 7" touch screen digitizer mounted onto the factory screen. Any help would be appreciated. I have the V35 NAV system manual/wiring schematics if anyone else needs to venture down this path.

A little trick I picked up tonight was how to reset your Airbag light when it flashes faulty. I disconnected the yellow plug on to of the glove box by mistake.

1.turn key on untill airbag light goes out

2.turn key off for over 3 sec

3.repeat 4 times

4.fault code is reset.

Cheers

Matt

Hey chris, i've still not got that tv thing working..

tho my antenna wires are way too short and i have to work out something to do there..

i'll try get the antennas connected and see if it will work..

true. unless I have you confused with someone else you had the OEM navi with a Alpine TV tuner and bruno was doing the job alongside a few euro cars at a peugeot dealership.

if that was you then the things not going to work. if its not then I'm confused.

  • 3 months later...

Decided to give this a try once more.. fixed my short antenna cable problems..

Using an external House Tv i have it set on Pal and things are great..

switch it back over to NTSC the tv in the M35 still does not work properly. image is all over the place and unreadable at times.

Aspect ratio a problem? I've tried every setting i can possibly try on the unit.

Cant seem to get the tv working at all. i am guessing its a problem with my M35's tv?? could that box on the previous page be causing problems??

post-31456-1261371618_thumb.jpgpost-31456-1261371644_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • They are, a good friend of mine bought one to replace his blow factory turbo, running a Toshi Tune reflash. Just use their supplied water/oil lines and you're good to go. At the time, they were like $900 delivered.
    • This is an option for 100% bolt on, the GCG high flow -  https://gcg.com.au/turbo-charger-upgrade-skyline-gtst-2iu-xtrgts-s1.html Also, I'm pretty sure hypergear does a high flow that is 100% bolt on, it just doesn't make as much power as their bigger high flows.  Even if you get a hypergear turbo that requires you to chance the intake piping, it is a really simple modification. It can be as simple as a piece of silicon hose and you pop a filter on the end. It doesn't have to be some crazy pie cut titanium work of art intake pipe.  If you have the ability to swap the turbo yourself, you would be able to sort the intake piping out. 
    • Just as a thought, if it's in neutral, thats your drive line disconnect, not the clutch. Clutch slip at the dyno with pedal fully out, is actually adding a second disconnect. So it's not a clutch issue if you're in neutral. Just a bit of friction dragging the output around while in the air.
    • The HG high flow is excellent, and costs about the $$ you're talking about. But it, and probably every other highflow, uses a diffeent core than the original turo, and the original Hitatchi core is quite long. So, I think it is inevitable that there is likely no such thing as a highflow that just "bolts on" with no other effort required. And the same is likely true for HG's outright replacement "bolt on" turbos (the ATR things). And the same is likely true for anything similar from elsewhere. I have no idea if the cheap Chinese/Taiwanese complete turbos from eBay/Temu/etc are as bolt on as they claim. I mean, they claim the bolt onto the NAs as well as the turbos, and we know that can't be "bolt on". But it wouldn't matter because I'm not buying a $169 4 psi turbo for anything other than a paddock basher.
    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
×
×
  • Create New...