Jump to content
SAU Community

First Impressions From Driving The R35


Recommended Posts

  • Replies 94
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

a good read!!

part 3 please....

ps: doesnt the need a 5000k run-in?? was told it needs a 5k run-in. saw the new r35 at Barbagello last week and the owner says it need at least 5k run-in b4 he can give the car a good rev.

Good work mate. I'm reliving all the memories of my drive vicariously through your post knowing it's going to be a long time until I drive another one.

I for one don't mind reading all the back story, good reviews are never just about numbers and boring facts most of us already knew anyway.

This almost sounds like a story you'd read in the Penthouse Forum

After all the wining and dining, did Koichi put out for you at the end of the night or were you left wanting?

hahah. :)

Jealous.

Thanks to all those who enjoyed the read and left some nice comments, much appreciated. :)

Edited by m3gtr
hahah. :)

Jealous.

Moving on, Thanks to all those who enjoyed the read and left some nice comments, much appreciated. :)

Ill be on part 3 this arvo. All's not perfect with the GTR, that much i can say.

Part 3...

30 minutes into the drive across Tokyo bay and in towards the skyscraper district known as Shinjuku, I'm feeling quite comfortable behind the wheel of the GTR. To me at least, its quite a user friendly vehicle - loads of power, stable, well behaved and solidly engineered. That slight lack of involvement, from a drivers point of view is one of the few problems the GTR has as its easy to become complacent with it from behind the wheel. The GTR almost does everything for you. More on that later.

I decide to change the suspension again to see what the "comfort" setting is like and much like the "R" setting, once activated, a change is almost immediately noticeable. In comfort, there is definitely more suspension travel. The GTR becomes more supple over the bumps and undulations and there is less of the rawness through the seat compared to "R" mode. It doesn't exactly float but you do notice the change in the way it deals with the road surface. I can't really tell if there has been any change in ride height, but when changing direction at speed or negotiating corners the GTR seems to roll a little more. Its not disconcerting, just not as hard edged.

The GTR's seats are very firm and grip the driver well, almost too well. While they have been beautifully crafted and offer a snug fit, i feel they wouldn't offer a big enough concession for the rigors of every day driving. They feel to me to have been engineered and designed on the side of performance over comfort which for certain applications is just fine but for others, may become a discomfort.

It tracks supremely well, and responds to steering input with precision. I quite like the way it handles. As I've already said, you get a lot of confidence through the wheel that the GTR isn't going to do something you haven't asked of it at any speed.

Overtaking is a breeze, in either A or M mode, just select a gear, plant the throttle and you are instantly transported around whatever was in front of you. This is also one of the GTR's short fallings. It lacks something fundamental in driver involvement. I feel like ive been slightly anesthetized, desensitized, behind the wheel of the GTR. While it is involving on a pure and raw level in regards to outright speed, feedback and handling, the lack of a clutch pedal and a 6 speed gate do detract from the pleasure that can be extracted from it. Whatever Nissan care to say about their choice in gearbox, i will say in the rear mounted dual clutched box's defense, that its design takes away the probability of NOT being able to extract what the car was originally made to deliver. Its foolproof in that respect but again, i know the GTR could even be more fun to drive, if ever there was a possibility of that actually being the case!

For real world users, the GTR's gearbox is perfect. It's the super car for dummies as you would, and doesn't have the fragility or highly strung temperament of many Italian or German cars that spring to mind. If you are a purist however, you will find yourself craving for a manual shifter. Nissan would be silly not to take a leaf out of Ferraris' book for example and include both the paddle shifter and manual versions in its future lineup.

In regards to stopping, the GTR's brakes are confidence inspiring and do their job more than adequately. Pedal travel is minimal and there is no shudder under heavy braking. A firm push of the well weighted pedal scrubs speed off rapidly. The pedal has a nice feel to it and decelerating quickly to negotiate a number of 90 degree bends from around 140kph didn't even so much as unsettle the car in any way. I was tempted to push the brakes further but thought better of it as this was my first time in the car. That and the fact that it had been snowing heavily in Tokyo the previous 2 days and the roads weren't completely empty.

With traffic and buildings becoming denser by the minute, i feel i just have to have another crack at the engine before we get boxed in. The road clears ahead of me, i wind the window down to hear the sound of the exhaust and engine - the air outside is chilled and crisp. I change down again into 3rd gear this time mashing the pedal to the floor, the GTR willingly, effortlessly, gets up and bolts ahead, blurring the scenery. Like a drug, the sheer speed that you can extract from the GTR will just have you coming back for more. I shoot into a tunnel- the exhaust note reverberates off the tunnel walls and as the revs pick up to a raucous rasping growl, 4th, 5th and 6th its Fast, too fast, have to back off. It can scare you silly if you let it. The engine note is understated at low revs but still signals ferocious intent further up the rev range. It really does go from kitten to clawed beast in a matter of seconds.

Final part later on.

thanx 4 reading.

Edited by m3gtr
a good read!!

part 3 please....

ps: doesnt the need a 5000k run-in?? was told it needs a 5k run-in. saw the new r35 at Barbagello last week and the owner says it need at least 5k run-in b4 he can give the car a good rev.

I havent heard that before. Perhaps youre right? Not sure, maybe others on the forum know the true answer. I wouldnt say i drove it excessively hard, but i did put it through its paces at certain points

lol, 5,000km run in? whoever told lcy that is having a laugh. by that measure it would take most owners about a year to get it run in. they are pretty much good to go from the factory but 500km or so is good practice before really giving it any boot.

it reminds me of the rumour about needing engine teardown every 12 months...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...