Jump to content
SAU Community

Recommended Posts

The boys changed the transfer case on saturday in the hope of getting some front drive. Didn't help much, the best they could get was 10% or so directed to the front. That's why you see pics of it black-tracking everywhere.

Aha.. That makes sense. It certainly looked like it was having traction issues!

  • Replies 569
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

yeah, there is something not quite right with awd. not exactly sure what but it's not getting enough front drive. we changed transfer case on saturday and it was a little better in the morning, but not much. mark reckons possibly a sensor failure or awd ecu not receiving an input (like TPS) as it's getting some pressure but not enough, which means it's baking the transfer case which means it gets worse and worse. on top of that they have a fair bit more torque than before and trying to put that power down on 265 semis is not easy, hell even some of the evos which are much lighter and with less toque run 285s!

the car went so well for it's first outing. nothing broke and apart from the little awd issue it ran absolutely perfectly. a credit to mark and russ for their hard work and all the other guys who worked on it too. mark drove the absolute wheels off the thing too and watching the in-car last night just goes to show he must have a giant set a it looks scary to drive. scary fun that is.... :banana: i'm sure russ will post some when he gets home, but i'd say the car is wheel spinning about 3/4s of the time! It's sideways from turn 5 all the way up the hill and onto the bridge through 3rd and 4th. then sideways off the bridge all the way to the S.

and yes cnj tune it.

We had the same or similar problem when we were running the Autronic ECU...it needs a voltage divider buffer circuit fitted to allow the attessa to share the same signal as the TPS without pulling it (the voltage level) down under load. The Vi-PEC had an issue too but was a much less complicated fix.

Hi Guys

well back from superlap,

and all is good, car is still in one piece and running great!

obviously have alot of things to sort through and keep building the car as it wasnt really finished ( but are they ever).

we need to get the 4wd drive sorted asap!! thanks for the advice paul will be looking at pressures and codes etc pronto. then off to get swaybars made as nopne were on the car for superlap, and

bump steer arms for the front end. then different diff ratios wilkl be changed as we couldnt use the torque to full advantage as we had too shorter ratios top speed was 250 down the front straight on the limiter before the start finish line!! ( we kept raising the limiter but far from ideal)

thanks for the comments

cheers russ'

here is some incar

Awesome incar Russ, just loving the power on oversteer :down:

The box is a Holinger?

Mustve felt good passing your old R32

it's a stock box, but with an ebay short shifter for quicker shifts. works well. :bunny:

seems as though you have the Tomei 1 gear set. had a look at ratios today and your ratios are quite close compared to mine which are the -15 gear set.

Still have some setting up to do, comes on boost nicely.

Keep up the good work Russ and crew.

All the best, and always keep in the loop with the development advancements. Good learning experience for us non circuit boys...

Hey Guys

We shot Marks car over the weekend and the feature, along with Superlap will be coming out in Motive DVD volume 2 which is due on shelf in June.

Motive DVD Volume 1 is based on the Red BUll Drifting World Championship and will be out start of May.

Heres the link:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...