Jump to content
SAU Community

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

so if i look from under the bonnet down between them i should see something?

its a very tight gap

but you can make it out if you look at the right angle

its on a plate, in between the turbos two housings. aka the core

Try a search. The tooth section of the cam gear wears very quickly because it is soft aluminium.

Also whilst you are arsing about with the gears change the belt & think about changing the water pump.

I think you have your wires slightly crossed, the older style of HKS cam gears were indeed prone to tooth wear, but the newer design (current model) are made from the same Duralumin alloy that the Tomei Cam Gears are made from.

Ok now i know ull say search but alot of things goes over my head.

Im about to spend a bit of cash on my GTR and im just after a little advice on wheather im doing the right thing or not and getting the best bang for my buck.

I have a GTR R33

Mods

Trust intercooler

3 1/2 Kakimoto 06&R cat back system

Just Jap front pipe

N1 Steel Turbos (believed)

Blitz PODS

Oil Catch Can

Now im thinking (Ive read and have thought these sounded the best for price) of getting these

Power FC and Controller $ 796

Greddy PRofec B Spec II $ 336

HKS Cam Gears $ 324

Total $1456

Plus tune of course.

Would that all go well together??? Any thing you would change etc....

Advice would be great!

-Install a Supercharger for low RPM then the turbos kick in at the mid high RPM

OR

-Install a NOS Kit

:banana::):(

Just get the boost controller and Power FC controller and/or upgrade the flywheel.

I think you have your wires slightly crossed, the older style of HKS cam gears were indeed prone to tooth wear, but the newer design (current model) are made from the same Duralumin alloy that the Tomei Cam Gears are made from.

Yeah sorry old info I guess. I saw some over the weekend advertised as duralium.

So I guess they have fixed it.

Million dollar quesrion: How do you pick the difference between the two?

Bought some Tomei cam gears

You need to focus on fuel before you throw money away on things like cam gears. If you really do have N1 turbos and you buy a PowerFC you're going to have your injectors maxed out before you will make much power.

Fuel is the pre-requisite to making power and should be your objective before things like cam gears. Injectors and a fuel pump.

I use SARD injectors and Nismo fuel pumps and recommend them.

Correct about the stock inj...they will be fine for the power you are looking at making. Might be worth getting them flow tested though.

Go the PFC...cam gears....boost control....K&N filter and you should see 250kw at the wheels at around 14-15psi. Just make sure you do indeed have steel wheeled turbos :D

Thanks mate...

Does anyone know are cam gears a defect in SA?

Just got the tomei ones and they look to nice to be hidden, so was thinking a clear cam cover but if there a defect ill keep them hidden... lol

Ok now i know ull say search but alot of things goes over my head.

Im about to spend a bit of cash on my GTR and im just after a little advice on wheather im doing the right thing or not and getting the best bang for my buck.

I have a GTR R33

Mods

Trust intercooler

3 1/2 Kakimoto 06&R cat back system

Just Jap front pipe

N1 Steel Turbos (believed)

Blitz PODS

Oil Catch Can

Now im thinking (Ive read and have thought these sounded the best for price) of getting these

Power FC and Controller $ 796

Greddy PRofec B Spec II $ 336

HKS Cam Gears $ 324

Total $1456

Plus tune of course.

Would that all go well together??? Any thing you would change etc....

Advice would be great!

Where do ou get the profec b for 336?

Also you should upgrade your fuel reg. To an adjustable nismo fuel reg one that replaces the oem one so u dont have to max out your injector cylce and u can bump the fuel rail pressure up so it is all safe. There only $200 buks too from memory mate. :wave:

also from memory it possible to make 300kw or close to on n1's with power fc, full exhaust dumps to rear, boost controller, fuel reg, maybe new fuel pump just be safe, small cams + cam gears and bigger front mount BUT most of all it depends on tune and conditon of engine and n1's mate :wave:

Also you should upgrade your fuel reg. To an adjustable nismo fuel reg one that replaces the oem one so u dont have to max out your injector cylce and u can bump the fuel rail pressure up so it is all safe. There only $200 buks too from memory mate.

Thanks ill have a look around for one..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
×
×
  • Create New...