Jump to content
SAU Community

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

so if i look from under the bonnet down between them i should see something?

its a very tight gap

but you can make it out if you look at the right angle

its on a plate, in between the turbos two housings. aka the core

Try a search. The tooth section of the cam gear wears very quickly because it is soft aluminium.

Also whilst you are arsing about with the gears change the belt & think about changing the water pump.

I think you have your wires slightly crossed, the older style of HKS cam gears were indeed prone to tooth wear, but the newer design (current model) are made from the same Duralumin alloy that the Tomei Cam Gears are made from.

Ok now i know ull say search but alot of things goes over my head.

Im about to spend a bit of cash on my GTR and im just after a little advice on wheather im doing the right thing or not and getting the best bang for my buck.

I have a GTR R33

Mods

Trust intercooler

3 1/2 Kakimoto 06&R cat back system

Just Jap front pipe

N1 Steel Turbos (believed)

Blitz PODS

Oil Catch Can

Now im thinking (Ive read and have thought these sounded the best for price) of getting these

Power FC and Controller $ 796

Greddy PRofec B Spec II $ 336

HKS Cam Gears $ 324

Total $1456

Plus tune of course.

Would that all go well together??? Any thing you would change etc....

Advice would be great!

-Install a Supercharger for low RPM then the turbos kick in at the mid high RPM

OR

-Install a NOS Kit

:banana::):(

Just get the boost controller and Power FC controller and/or upgrade the flywheel.

I think you have your wires slightly crossed, the older style of HKS cam gears were indeed prone to tooth wear, but the newer design (current model) are made from the same Duralumin alloy that the Tomei Cam Gears are made from.

Yeah sorry old info I guess. I saw some over the weekend advertised as duralium.

So I guess they have fixed it.

Million dollar quesrion: How do you pick the difference between the two?

Bought some Tomei cam gears

You need to focus on fuel before you throw money away on things like cam gears. If you really do have N1 turbos and you buy a PowerFC you're going to have your injectors maxed out before you will make much power.

Fuel is the pre-requisite to making power and should be your objective before things like cam gears. Injectors and a fuel pump.

I use SARD injectors and Nismo fuel pumps and recommend them.

Correct about the stock inj...they will be fine for the power you are looking at making. Might be worth getting them flow tested though.

Go the PFC...cam gears....boost control....K&N filter and you should see 250kw at the wheels at around 14-15psi. Just make sure you do indeed have steel wheeled turbos :D

Thanks mate...

Does anyone know are cam gears a defect in SA?

Just got the tomei ones and they look to nice to be hidden, so was thinking a clear cam cover but if there a defect ill keep them hidden... lol

Ok now i know ull say search but alot of things goes over my head.

Im about to spend a bit of cash on my GTR and im just after a little advice on wheather im doing the right thing or not and getting the best bang for my buck.

I have a GTR R33

Mods

Trust intercooler

3 1/2 Kakimoto 06&R cat back system

Just Jap front pipe

N1 Steel Turbos (believed)

Blitz PODS

Oil Catch Can

Now im thinking (Ive read and have thought these sounded the best for price) of getting these

Power FC and Controller $ 796

Greddy PRofec B Spec II $ 336

HKS Cam Gears $ 324

Total $1456

Plus tune of course.

Would that all go well together??? Any thing you would change etc....

Advice would be great!

Where do ou get the profec b for 336?

Also you should upgrade your fuel reg. To an adjustable nismo fuel reg one that replaces the oem one so u dont have to max out your injector cylce and u can bump the fuel rail pressure up so it is all safe. There only $200 buks too from memory mate. :wave:

also from memory it possible to make 300kw or close to on n1's with power fc, full exhaust dumps to rear, boost controller, fuel reg, maybe new fuel pump just be safe, small cams + cam gears and bigger front mount BUT most of all it depends on tune and conditon of engine and n1's mate :wave:

Also you should upgrade your fuel reg. To an adjustable nismo fuel reg one that replaces the oem one so u dont have to max out your injector cylce and u can bump the fuel rail pressure up so it is all safe. There only $200 buks too from memory mate.

Thanks ill have a look around for one..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...