Jump to content
SAU Community

Recommended Posts

Hos high is the turbo sitting? Or is it just the angle of the photo. Would think you could have bonnet clearance problems, or at least need to protech yourbonnet paint from temps? .. Great looking engine

That is how it sits, it will clear the bonnet and i have reflective high temp adhesive above the turbo/gate.

What turbo, I thought you were going to order a GTX35?

Its a GT35R, the new head and turbo (GTX35R) will go on just before powercruise.

Is that a standard water pump??

Standard RB30 pump.

Engine bay looks nice and clean!

Why is the turbo so high?

lol. I remember a bloke with a super high single and bonnet closure problems.... who was it again? :ph34r:

and I do enjoy the VL super high mount. be a bastard cleaning all the dead bugs out of the mesh though... :down:

Seeing as i work nights i dont expect many phone calls or texts at the wee hours of the morning, so i was a little surprised at 2am when i get sent these:

IMG_0638.jpg

IMG_0627.jpg

Paul was up all night putting some finishing touches on the engine before the install this week. The hours spent on this project to date can add up to weeks. All the fine detail work takes alot of time!

I am very grateful for all the effort he has put in on this thing and i believe it is as much his as it is mine.

VCT? its still a 25 until next year?

I thought the stock VCT was just a solenoid on the left which interacts with the head, didn't think it did anything with the cam gear. I also thought it was on the exhaust cam only, but could be completely wrong.

Reason I ask is there are full adjustable (change based on rpm) cam gears that look similar to what is on his intake cam, they are around $3000 though from what I've seen, fairly complex piece of hardware.

Edited by Rolls
I thought the stock VCT was just a solenoid on the left which interacts with the head, didn't think it did anything with the cam gear. I also thought it was on the exhaust cam only, but could be completely wrong.

Reason I ask is there are full adjustable (change based on rpm) cam gears that look similar to what is on his intake cam, they are around $3000 though from what I've seen, fairly complex piece of hardware.

nah, take a look at all RB25DET cam gear covers, all have the bulge for that camgear

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...